OZ Lifting Products stainless series
OZ Lifting Products will preview its stainless steel lineup at WEFTEC, including lever hoists (0.25 to 3 ton), chain hoists (0.25 to 5 ton), beam clamps (1 to 5 ton) and push beam trolleys (0.25 to 5 ton). Built from type 304 stainless steel, the line is engineered for tough conditions in water treatment and wastewater facilities. This equipment is well-suited for material handling and maintenance tasks where corrosion-resistance is imperative. Custom rigging is available. The new stainless steel davit crane prototype rounds out the lineup as a mobile solution for facility maintenance and small-footprint lifts. 800-749-1064; www.ozliftingproducts.com
Lovibond MD50 colorimeter
The MD50 colorimeter from Lovibond combines a simple user interface with advanced optics to deliver required accurate and reliable results. With a total of 10 models, each for measuring a single parameter, the MD50 packs a lot of features into a durable, hand-held instrument. 800-922-5242; www.lovibond.com
Smith & Loveless OPTIFLOW 270 baffle system
The OPTIFLOW 270 baffle system from Smith & Loveless is an advanced retrofit solution designed to enhance grit removal performance in PISTA 270 grit chambers and other kinds of 270-degree vortex grit removal systems. Engineered to improve grit capture across all flow conditions, the system elevates removal efficiencies to 95% for particles down to 150 microns, ensuring superior system performance. The complete 270 baffle system comprises up to three specialized baffle elements: OPTIFLOW 270 LFB, B and STF. The LFB baffle is installed on all units where the lowest flow rate is below 60% of the design rate, ensuring proper influent velocity into the vortex chamber. The B baffle, positioned at the chamber’s exit, enhances the toroidal flow path by reducing the weir effect and increasing fine grit retention. For non-S&L 270-degree vortex grit chambers with sloped floors, the STF baffle can be applied to convert the system for optimal grit removal performance, aligning it with PISTA-level efficiency. 800-898-9122; www.smithandloveless.com
Wastecorp Pumps Sludge Pro MK Series pumps
Sludge Pro MK Series double-disc pumps from Wastecorp Pumps are designed for tough fluid handling at municipal wastewater treatment plants. The MK Series offers several connection sizes and optional accessories for optimal performance. Features like an optional automated rotating frame, exclusive Guide Pilot and pressure sensors provide a user-friendly, low-maintenance solution. The pumps are available in 4-, 6-, 8- and 10-inch connections and have capacities from 165 to 1650 gpm. Pump up to 75 psi with operating ranges up to 500 rpm. The MK Series pumps are available in piggyback, side-mounted belt-driven and direct-drive electric motor options and can run dry without damage. 888-829-2783; www.wastecorp.com
SEW-EURODRIVE GearOil synthetic lubricant
SEW-EURODRIVE’s GearOil is a synthetic lubricant, formulated and tested by SEW-EURODRIVE engineers specifically for SEW-EURODRIVE gear geometries and thermal loads. It is now offered as part of the factory build and service ecosystem for products such as the X.e and MC-series gear units. Key benefits include optimized wear protection from startup through full-duty cycle and exceptional thermal performance ideal for splash, pressure or oil-to-air cooled systems. It offers system-wide compatibility that is fully compatible with SEW-EURODRIVE’s pressure lubrication systems, splash lubrication configurations and oil-to-air cooling assemblies. And GearOil eliminates the initial 500-hour oil change on X.e and MC-series gear units. 864-439-7537; www.seweurodrive.com
Denso Covercoat system for corrosion protection
Denso’s Covercoat System is a comprehensive corrosion prevention solution engineered for steel and concrete columns, support legs, structural steel and a wide range of exposed service pipes and more. The system is specifically designed to be applied to marginally prepared surfaces in accordance with SSPC SP 2-3 standards, eliminating the need for costly and time-consuming full surface preparation. Its high conformability and strong adhesion allow it to encapsulate irregular shapes and profiles, ensuring instant and uniform protection regardless of the underlying substrate. The system is UV resistant and capable of encapsulating lead paint, providing an added layer of safety during remediation projects. Once applied, Covercoat forms a seamless, durable barrier that delivers over 20 years of corrosion resistance with virtually no maintenance. 888-821-2300; www.densona.com
Fluid Components International ST75 series flowmeter
The compact ST75 Series Air/Gas flowmeter from Fluid Components International offers a reliable solution for accurate flow measurement in crowded equipment areas. The ST75 flowmeter utilizes advanced thermal dispersion sensing technology, providing accurate and consistent measurements even in challenging environments. It is ideal for processes requiring precise dosing or injection of many gases: ammonia, argon, carbon dioxide, chlorine, ethane, fluorine, nitrogen, ozone, refrigerants, sulfur dioxide and many more. The meter’s flow element features a rugged, no-moving parts design for superior reliability. The flowmeters feature a full digital display and are also available with optional transmitter remote mounting capabilities for hazardous plant environments. The remote transmitter can be mounted up to 100 feet away from its thermal mass flow sensor in piping or ductwork and connected via two 1/2-inch FNPT or M conduit connections. 800-854-1993; www.fluidcomponents.com
