Blowers

Eurus Blower ZZ Series

ZZ Series blowers from Eurus Blower are drop-in replacements for competitor blowers. They have heavy-duty cast housings, machined impellers, alloy steel shafts with oversized bearings, hardened/precision machined steel forged gears, oil-lubricated gear and/or grease- or oil-lubricated drive sides, plus keyless locking assemblies for easier timing gear maintenance. The blowers provide up to 15 psig pressure and 2,350 cfm flow. 918-361-0285; www.eurusblower.com

Kaeser Compressors FBS 720 series

The FBS 720 series of low-pressure rotary screw blowers from Kaeser Compressors offers synchronous reluctance motors that achieve significantly higher efficiency. The flow rate is adjusted to actual demand through variable speed. They allow access from the front of the unit for side-by-side installation. The complete package includes the VFD, controller and sensors. They are turnkey systems, arriving on site and ready to run, complete with noise-insulated cabinets, inlet and outlet silencers, motors and drives. The intelligent SIGMA CONTROL 2 on each blower optimizes machine performance via various control modes, and a full suite of sensors provides active condition monitoring to protect the machine. Both fixed (STC) and variable speed (SFC) units arrive fully wired and UL-certified. The blower’s compact design facilitates installation and uses minimal floor space. 800-981-6888; us.kaeser.com/blowers

Coupling/Fittings

AqueoUS Vets Waterworks Pipe and Fittings

AqueoUS Vets Waterworks Pipes and Fittings include custom ductile iron flange spools or plain end configurations, available in up to 24-inch overall dimension and steel pipe spools, available in flange, grooved, or plain end configurations in up to 36-inch overall dimension and lined/coated per specification requirements with NSF 61-approved material. Manufactured by staff certified to ASME B31.1 and B31.3 standards, additional certifications and standards are available upon request. These custom pipe designs, pipe fabrication and specialty linings and coating solutions are available in any size or quantity, provide savings opportunities, and are fabricated in a controlled environment with reduced lead times and increased product quality. 925-331-0573; www.aqvets.com

Drives

Franklin Electric Cerus X-Drive

Designed for variable torque applications up to 600 hp, the Cerus X-Drive is Franklin Electric’s all-inclusive drive solution for a variety of markets. Available as a standalone drive and in multiple enclosed configurations, these panels are built to last, according to the maker, with every detail and component centered around the application’s specific requirements. It can be paired with a choice of motors and pumps to maximize the performance of the application. 866-271-2859; www.franklinengineered.com

Motors

US MOTORS aerator duty vertical motor

Nidec Motor Corporation and its US MOTORS brand offers an aerator duty vertical motor with frame sizes up to 286 inches, ideal for biological treatment of wastewater stored in settling tanks and ponds. The aerator function introduces air to the process, facilitating the aerobic biodegradation of organic material. The motors can be engineered to meet a customer’s specifications, including meeting NEMA, IEEE and API standards. 888-637-7333; www.usmotors.com

WorldWide Electric Premium Efficient Vertical HOLLOSHAFT Motors

Premium Efficient Vertical HOLLOSHAFT Motors from WorldWide Electric are designed for use in turbine pump applications including irrigation, energy generation, mining, municipal water and chemical applications. Ideally suited for use with inverters or soft starts, the motors are the solution for both standard and high-thrust installations. These durable motors feature outer epoxy corrosion-resistant paint, epoxy-coated rotor and windings, and a felt end bell seal to protect from pump seal failure. 800-808-2131; www.worldwideelectric.net

Motor and Pump Controls

Automation24 VEGAPULS C 21

The VEGAPULS C 21 from Automation24 is a noncontact, radar level sensor utilized frequently in wastewater management applications. The device has been used to monitor water levels in pumping stations and for monitoring flow in open channels and dams. It is made of resistant and durable materials to help it survive harsh industrial environments, dealing with environmental factors like a humid environment, condensation on the sensor body and foamy water. It has a measuring range of up to 50 feet and outputs a radar frequency of 80 GHz to keep a narrow 8-degree beam angle. This sensor has features that can be edited through the VEGA software, either via Bluetooth on smartphones or on a computer for more nuanced tweaks to see the true level and flow of the water that is being treated. 800-250-6772; www.automation24.com

Gorman-Rupp Integrinex 

Gorman-Rupp’s Integrinex line of lift station controls is designed to ensure system performance through precise matching of controls to pumps and motors. The liquid level controls are available in four styles when combined with Gorman-Rupp ReliaSource solids-handling pump packages: Basic offers simple, reliable plug-and-play performance and is designed for accurate start/stop operation in a duplex alternating pump system; Standard includes duplex and triplex alternation, level sensors, pump delay and alarms; Advanced includes soft starters and VFDs to manage electric inrush, hydraulic shock and matching starting and stopping torque-based management and monitoring; and remote view offers all the functionality of the advanced system with the added convenience of remote-based management and monitoring. 419-755-1011; www.grpumps.com

Orenco Systems OLS control panels

OLS control panels from Orenco Systems are designed and built for an array of municipal pumping applications including wastewater lift stations, stormwater pump stations, dewatering pump control, sludge pumping and freshwater boosting. The panels are available with Orenco Cloud service, which eliminates the need for a separate SCADA system. As another option, the panels can be connected to an existing SCADA system. Parameters can be configured with our user-friendly startup wizard via a remote computer or tablet or using the included touchscreen. Engineers will preprogram user interfaces to the site-specific needs of an installation, making the panel virtually “plug and play.” Maintenance staff can easily adjust settings and monitor the system remotely. The panels are weatherproof and UL 508A listed. They also include service-rated circuit protection, phase and voltage protection, and level controls. 877-257-8712; www.orencocontrols.com

Pipe/Parts/Components

Infiltrator Water Technologies ECOFILTER Pump Vault

The ECOFILTER Pump Vault tank filtration system from Infiltrator Water Technologies reduces biological loading and clogging, prolonging the life of downstream drainfields and other treatment systems. Quick to install in new or existing tanks, the vault is a completely integrated system for pumping effluent from single or double compartment tanks. It draws effluent from the clarified zone of the tank to minimize suspended solids passing through the pump system. The easy-access design maximizes the filter surface area and simplifies filter inspection and maintenance by enabling filter cartridge removal without pulling the pump or vault. Featuring a dual-compartment housing for simplex or duplex applications, the product is constructed of high-density polyethylene with UV inhibitors for longevity and the float stem bracket allows easy removal and adjustment of the float assembly. Customizable for nearly any project need, the unit is suitable for S.T.E.P. collection systems and effluent treatment. 800-221-4436; www.infiltratorwater.com

PRIMEX ARC ARMOR enclosure

The safe, innovative, multiple compartment ARC ARMOR enclosure from PRIMEX reduces the risk of injury resulting from arc flash and electric shock by limiting access to electrical equipment capable of producing arc flash incidents. The control and power circuitry are isolated in separate compartments, where only control voltage is present (120-volt max), thus preventing unnecessary exposure of operators to arc flash. It reduces exposure to arc flash and arc blast with its multiple compartment design and single wall construction. It has a single sheet drip cap with rolled edge drip loops on free-standing models. It includes electrostatically precipitated white polyester powder coating, which reduces heat buildup, and three-point padlockable operating handles. Free-standing, wall-mount and pole-mount versions are available. 844-477-4639; www.primexcontrols.com

Pumps

Ashland Pump AGP-HC200 Grinder Pump

The AGP-HC200 Grinder Pump from Ashland Pump combines two cutting mechanisms to tackle waste. Its radial section efficiently grinds waste into a fine slurry, while the axial section excels at cutting and chopping stringy solids and waste into smaller, more manageable pieces. This dual-action approach ensures that even fibrous materials are easily processed and do not cause clogs in the discharge pipe. Moreover, its cutters are engineered to prevent wrapping at the inlet, a common issue with grinder pumps. Crafted from case-hardened 440 stainless steel, these cutters are not only durable, but also easy to sharpen and adjust for optimal performance. 855-281-6830; www.ashlandpump.com

Blue-White FLEXFLO M3

FLEXFLO M3 chemical metering pumps from Blue-White dependably deliver smooth and accurate chemical dosing. It includes a bright, easy-to-access and highly responsive 5-inch display screen, and the intuitive screen is as simple to operate as a cellphone. They have a broad 10,000-1 turndown ratio to meet a vast range of dosing requirements, and they’re equipped with a brushless DC motor for trouble-free and energy-efficient service. Remote control signal options include Pulse, 4-20mA, Modbus TCP, EtherNet IP and PROFIBUS for enhanced supervision and automation for critical metering and transfer applications. 714-893-8529; www.blue-white.com

Boerger BLUEline

Boerger BLUEline rotary lobe pumps are a self-priming, valveless, positive displacement pump used for conveying viscous and abrasive materials. They are resistant to wear and provide pulsation-free operation. Operation is fully reversible with dry-run capability and flow rates up to 7,000 gpm. They are constructed with maintenance-in-place design, allowing for all wetted parts to be easily replaced through the front cover without removing pipe or drive systems. The pump conveys biosolids (primary, waste activated sludge, return activated sludge, digested, thickened, etc.), grease, sewage, scum, lime slurry, alum sludge, permeate and polymers. 612-435-7300; www.boerger.com

Cat Pumps stainless steel triplex pumps

Cat Pumps stainless steel triplex pumps mounted to a gear motor can provide thousands of hours of maintenance-free slip pump service. Direct-coupling the pump to a gear motor offers many advantages, including a smaller footprint, reduced noise and ease-of-service with no belts to maintain. A 316 stainless steel manifold, paired with elastomers like NBR, FPM, EPDM or PTFE, allows many chemical and fluid compatibility options. Performance specifications range from 0.1 to 100 gpm and 100 to 10,000 psi. Custom builds can include pump(s), motor(s), base, pressure control valves, pressure gauges and/or pulsation dampeners. Custom builds typically have a three- to four-week lead time with individual pumps and repair parts usually being in-stock items with 95% of orders shipped within 24 hours of placement. 763-780-5440; www.catpumps.com

Crane Pumps & Systems envie3

The envie3 air-filled motor series dry pit submersible pump from Crane Pumps & Systems can run in wet applications and in dry pits. These pumps outfit Barnes’ and Deming’s nonclog and chopper wet ends with a premium efficient/IE3 motor that can run in both vertical and horizontal configurations. The closed-loop glycol cooling system allows for easy maintenance and installation in demanding applications. For easy serviceability, the horizontal installation options include a cart system, which creates a back pullout option as well as a fixed bracket configuration. Install horizontally for a smaller footprint. Vertical installation configurations include a metal and concrete stand that allow for 360-degree rotation for adapting to existing piping, including tangential discharge pumps. 937-214-9008; www.cranepumps.com

NETZSCH Pumps USA TORNADO T1 Generation F

The TORNADO T1 Generation F pump from NETZSCH Pumps USA is versatile for just about any orientation and installation. Its robust design offers longevity, operational flexibility and dry-run capabilities. It allows the pump to operate and handle many upset process conditions without causing harm to the pump. The pumps are available up 4,000 gpm and 145 psi, and can handle a wide range of viscosities, solids, temperature, abrasion and corrosive/acidic process fluids and environments. The Full Service-in-Place pump has a front pullout design that allows for easy access for maintenance and inspection. Opening the front cover allows access to the wear plates, lobes and seals, making it easy to service. Additionally, there is no need to access the timing gears or bearings, as they are protected with the NETZSCH Gearbox Security System. This desirable feature protects the gearbox from the process side of the pump (wet-end). 610-363-8010; www.pumps-systems.netzsch.com

Pulsafeeder PulsaPro7440

When chemical injection processes demand dependable and accurate delivery where space is limited and reliability and convenience are required, Pulsafeeder’s PulsaPro 7440 has the compact size and features to make operation and maintenance easier and faster. The large, easy-to-view hydraulic diagnostic window provides observation of oil condition and proper pump operation saving time troubleshooting. Externally adjustable bypass valves protect the pump from system over-pressurization and quickly adapt to changing process conditions. The push-to-purge button allows for on-demand removal of air from pump hydraulics to avoid wasting energy from inefficient pump operation. When precise and accurate chemical delivery matters the PulsaPro 7440 provides dosing accuracy of plus/minus 0.5% across its operating range, whether the stroke length is set at full capacity or 10% of maximum. It is available with flows up to 1,098 gph and pressures up to 3,200 psig. 800-333-6677; www.pulsafeeder.com

Smith & Loveless EVERLAST Pump Station

Smith & Loveless EVERLAST Pump Stations offer a high ease of operation and maintenance, high level of operator safety, long-lasting service life, pump technology that eliminates clogging from flushables and low life cycle costs. All pumping, mechanical and electrical components above the wet well with immediate access at ground level. This means that the STAR ONE Non-Clog Pumps reside at ground level out of the sewage and always dry. Likewise, all the valves, piping and controls reside also above the wet well, meaning that inspection of the entire pump station can be accomplished in seconds by simply opening the hooded enclosure. 800-898-9122; www.smithandloveless.com

Trillium Flow Technologies Floway VTP General Vertical Turbine Pump

The Floway VTP General Vertical Turbine Pump from Trillium Flow Technologies is a vertical close coupled, single or multistage turbine pump with a cast or fabricated discharge head, top-mounted motor and closed suction or wet pit design. This pump is available in a variety of material combinations for multiple water applications. It offers NSF/ANSI 61 and 372 certification for potable water with top hydraulic performance, low vibration levels, a long service life and reliable aftermarket and service solutions. It is capable of pressures up to 1,500 psi, with a capacity of up to 35,000 gpm. it can be operated in temperatures of -40 to 175 degrees F. 832-200-6220; www.trilliumflow.com

Vaughan Chopper Pump

Self-priming Chopper Pumps from Vaughan are designed to be easily accessed outside of the wet well while pumping waste solids at heavy consistencies, without plugging or dewatering of the solids. They eliminate the loss in production and mess, along with making it easy to service the pump to get it back in operation. 888-249-2467; www.chopperpumps.com