The PL-CPE5A from Polylok is a submersible 1/2 hp, 115-volt, single-phase effluent pump with a 2-inch NPT vertical discharge. It has a maximum head of 48 feet and a maximum flow of 64 gpm. It is designed with a 3,450 rpm, oil-filled permanent split-capacitor motor and has an amp rating of 8.5 for 115 volts, cast iron housing, and volute equipped with a cast iron vortex impeller that passes 3/4-inch-diameter solids. The stainless steel shaft is supported by two single-row, oil-lubricated ball bearings. The shaft seal is an inboard design with a secondary exclusion V seal. Construction materials are carbon for the rotating face and ceramic for the stationary face. All elastomers are Buna-N, and the hardware is 300 Series stainless steel. It has a 20-foot UL/CSA-listed power cable that’s suitable for submersible service and fitted with a three-prong plug. It is supplied with an integrated clip on its piggyback mechanical float switch for automatic operation. 877-765-9565; www.polylok.com
