Blowers

Howden Roots EasyAir Rotary

The Roots EasyAir Rotary factory package blower from Howden is configurable to meet the unique requirements in both pressure and vacuum wastewater applications. It is integrated with controls and has variable-speed drive capability while maintaining easy maintenance and fully removable enclosure panels for 360-degree access. The small footprint and side-by-side installation allow for more efficient use of available space, all while having limited free field noise levels to 80 dBA. It provides the customer with air at a given pressure and flow. The unit can come equipped with analog gauges or an integrated color display controller for package health monitoring. Its enclosure design allows it to be installed in either indoor mechanical rooms, or outdoors closer to the customer’s process. 800-557-6687; www.howden.com

Kaeser Compressors EBS 410

Available in 30 to 100 hp models, Kaeser Compressors’ energy efficient EBS 410 expands the range of rotary screw blowers for wastewater and fluidization applications and provides up to 1,448 cfm with pressures from 4 to 15 psig. They are suitable for municipal and industrial wastewater, flotation, fluidization, and other low-pressure applications where energy efficiency is critical. They are shipped completely assembled with high-efficiency motors, inlet filters, silencers, integral starters/drive and a full complement of sensors for reliable operation and an efficient package. The advanced Sigma Control 2 is standard on all models and features expanded communication capabilities, including remote monitoring and email notifications for service and alarms. With Sigma Control 2, the units can be seamlessly integrated into plants that are implementing IoT or Water 4.0 strategies. 866-516-6888; www.us.kaeser.com

Couplings/Fittings

AGRU America PE pipes and fittings 

AGRU America offers pipes and fittings made from polyethylene 100/4710 for durability and corrosion/abrasion resistance, used in many municipal and industrial applications. The pipe and fitting products include large-diameter pipe, HDPE pipe fittings, Mine-Line pipes, electrofusion fittings and equipment, ball valves, metric solutions, and semi-finished products. Product benefits include long-term service life and reduced operational costs, suitable flow and weight characteristics, manufacturing in both butt fusion and electrofusion fittings, and proven performance in gas, water, industrial and municipal applications. 800-373-2478; www.agruamerica.com

Motor and Pump Controls

Badger Meter Dynasonics TFX-5000

The Dynasonics TFX-5000 ultrasonic clamp-on flowmeter from Badger Meter accurately measures the volumetric flow of clean liquids and those with small amounts of suspended solids or aeration, such as surface water or raw sewage. It is suitable for water and wastewater applications such as lift stations, booster pump stations and water mains. This meter provides accuracy up to 0.5% and flow rates ranging from 0.07 to 33,000 gpm on pipes as large as 48 inches. Designed to clamp onto the outside of pipes, the meter does not contact the internal liquid, allowing for installation without shutting down operations in new and retrofit applications. It is equipped with an internal clock and built-in 8 GB data-logging capabilities to log flow down to one second. It also pairs with dual clamp-on resistance temperature detectors for Btu energy measurement. 877-243-1010; www.badgermeter.com

Blue-White Industries Sonic-Pro MS6

The MS6 Ultrasonic Chemical Flow Meter from Blue-White uses transit time technology to closely track chemical being dosed from a chemical feed pump into the system. This allows the operator to make certain the proper amount of chemical is being injected. Data advising the exact flow rate being dosed is delivered directly from the MS6 to the SCADA system. The MS6 gives a precise measurement of chemical being fed so that proper dispensing/dosing can be easily verified thus avoiding an overdose or underdose.  714-893-8529; www.blue-white.com

Force Flow Chlor-Scale and Halogen Eclipse

To protect chlorination systems from dangerous leaks, the Halogen Eclipse emergency valve shut-off system instantly closes the container valve when a signal is received from a leak detector, panic button or SCADA. The actuator quickly installs on the tank without the use of any tools and allows manual operation of the valve while in place. During an emergency shutdown event, the system measures the actual torque applied to the valve to ensure that the valve is closed to Chlorine Institute recommended standards and provides remote confirmation that the emergency close operation successfully closed the valve. The Chlor-Scale from Force Flow safely cradles a chlorine ton container while providing critical feed and chemical inventory information. Know in real time exactly how much chlorine has been fed and how much remains in the tank. It can warn of excessive or insufficient feed rates and can be remotely monitored from a PLC or SCADA system. 925-893-6723; www.forceflow.com

Orenco Systems 4-in-1 Controller

The 4-in-1 Controller from Orenco Systems supports numerous electrical configurations and dosing schedules within a single panel. Both Simplex (MVP-S2DM) and Duplex (MVP-DAX2DM) models are available and can be configured in the field for timed or demand dosing. While the control circuit operates on 120-volt power, the pump circuit is dual-rated for both 120- or 240-volt power, meaning installers and service providers can reduce their panel inventories for new installations and repairs. It includes a programmable logic unit with multiple timing intervals for changing flow conditions and has a built-in elapsed-time meter and counter. It also displays float position and has a float error indicator. Each panel includes a reference chart to assist with troubleshooting during installation and testing, as well as wiring diagrams. It is completely touch safe. 877-257-8712; www.orenco.com

PRIMEX Pump Watch Express

Pump Watch Express from PRIMEX is a comprehensive family of 4G LTE/3G compact cellular RTUs and gateways used for monitoring pumping systems. It offers a simple tool for management of multiple sites, including alarm notification, data logging and graphic system visualization. It includes a lithium-ion backup battery for power loss detection and notification, SMS/email/web portal alarm notifications, graphic HMI with simple and clear station status display, interactive pumping station map, data logging and historical trending, first year of service included, and optional web portal customization. The NEMA 4X control panels come in three versions: lite, premium and gateway. 844-477-4639; www.primexcontrols.com

Pipe/Parts/Components

Patterson Davit Crane

Patterson Mfg. Davit Cranes are manufactured with a low maintenance, easy-to-assemble design. They are available in 1/2- and 1-ton capacities with key features such as a reliable brake with long life and readily available parts, a hot-dipped galvanized finish, and no plastic sheaves or pulleys. 800-322-2018; www.pattersonmfg.com

RELINER/Duran Stainless Steel Pipe Supports

Stainless Steel Pipe Supports from RELINER/Duran are easily installed adjustable clamping pipe brackets available in noncorrosive 11-gauge type 304 or 316 stainless steel. Often used as part of an inside drop in sewer manholes, they are also used to secure pump discharge lines, conduit, pumps, roof leaders and any other pipe to structure walls. In a marine environment they are used around piles to mount equipment. The slotted legs are adjustable to allow for variations in the offset distance between the pipe and the wall, and to accommodate irregular mounting surfaces. Clamps are stocked for 1.5- to 30-inch pipes including SDR35, Sch 40, IPS, HDPE, C900 and DN. 800-508-6001; www.reliner.com

Pumps

Ashland Pump effluent pumps

Heavy-duty effluent pumps from Ashland Pump are available in multiple horsepower sizes for various performance requirements and have efficient permanent split-capacitor motors. The oil-filled pumps have an upper and lower ball bearing design and handle solids up to 3/4 inch. They are made of heavy cast iron, with cast iron impellers and equipped with a piggyback switch (20-foot standard cord) or in manual configurations. They are offered in 3/10, 4/10, 1/2, 3/4, 1 and 1 1/2 hp models. 855-281-6830; www.ashlandpump.com

Boerger BLUEline

The BLUEline rotary lobe pump from Boerger is a self-priming, valveless, positive-displacement pump used to convey viscous and abrasive materials. There are 21 pump models in six series with pulsation-free operation, fully reversible rotation, dry-run capabilities and flow rates up to 7,500 gpm. The pumps are manufactured to be stable and wear resistant with a maintenance-in-place design that allows for all wetted parts to be easily replaced through the front cover without removing the pipe or drive systems. The pump conveys sludge, biosolids, grease, sewage, scum, lime slurry, alum sludge, permeate and polymers. 612-435-7300; www.boerger.com

EPIC INTERNATIONAL Landustrie Archimedian

Landustrie Archimedean screw pumps from EPIC INTERNATIONAL are suitable for pumping unscreened liquids due to their capability to carry large solids. They are a suitable choice for large flow applications, as the wire-to-water efficiency averages in the 80% range for units mounted at 30 degrees. Their most common applications are flood control, sewage lift stations and primary influent. The design is based on a maximum desired capacity with a linear torque curve. They will self-regulate without needing to adjust the speed or any other parameter, and the power draw will reduce accordingly. Open-flight screw pumps can run continuously, both empty and overfilled, with no detrimental effects on the equipment. 804-798-3939; www.epicintl.com

Duperon 5-in-1 Dual Auger System

The Duperon 5-in-1 Dual Auger System is deployed in targeted high-ragging manholes/wet wells to remove problematic debris and prevent chronic pipe and pump clogging. Removing wipes at, or near, the point they enter the sewer stops the problem where it starts without impacting downstream operations. The system captures, dewaters, compacts, conveys and stores problematic debris in a below-grade discharge pipe, where it can be emptied by vacuum trucks. This creates an opportunity to transform emergency, dirty, unsafe and manual cleanouts into planned, safe and coordinated debris removal. Simply uncover, insert vacuum truck suction tube into the discharge chute, remove debris and landfill. 800-383-8479; www.duperon.com

FPZ Doseuro metering pumps 

FPZ’s range of Doseuro chemical dosing pumps are available in three main versions: plunger pumps with packed plungers; plunger/hydraulic diaphragms; or mechanical diaphragms. High-pressure pumps are available upon request. The range of pumps also includes various driving methods, such as electric motor or electromagnetic solenoid operation. 262-268-0180; www.fpz.com

Neptune Chemical Pump NSP Series and NXP Series

Featuring a durable, low-maintenance solenoid drive equipped with double-ball valves, Neptune Chemical Pump NSP Series solenoid metering pumps ensure consistent and precise dosing of a variety of chemicals. The compact design and easy-to-use control provides more efficient operation and shorter setup times for operators. The small footprint allows it to easily integrate into dosing systems with limited space. It is available in manually, analog- and pulse-controlled models. Thanks to its compact design and intelligent-drive concept, NXP Series Stepper motor-driven metering pumps combine the advantages of a solenoid-driven pump with the precision of a motor-driven pump. This makes them a solution to safely feed chemicals in highly accurate, reproducible applications. They are fully adjustable to produce a constant supply stream during low-pulsation dosing, and the stepper motor with its wear-free tooth belt drive ensures a homogeneous and gentle dosing process. 215-699-8700; www.neptune1.com

Polylok PL-CPE4A

The Polylok PL-CPE4A is a submersible, 4/10 hp, 115-volt, single-phase effluent pump with a 2-inch NPT vertical discharge. It has a maximum head of 38 feet and a maximum flow of 56 gpm. The pump is designed with a 3,450 rpm oil-filled permanent split-capacitor motor and has an amp rating of 6.6 for 115 volts, a rugged cast iron housing and volute equipped with a cast iron vortex impeller capable of passing 3/4-inch-diameter solids. The stainless steel shaft is supported by two single-row, oil-lubricated ball bearings. The shaft seal is an inboard design with a secondary Exclusion V seal. It has a 20-foot UL/CSA-listed power cable suitable for submersible service and fitted with a three-prong plug. The unit is supplied with an integrated clip for the included piggyback mechanical float switch and used for automatic operation. 888-765-9565; www.polylok.com

Pulsafeeder PulsaPro

PulsaPro pumps from Pulsafeeder are positive displacement hydraulically actuated diaphragm metering pumps that combine the high efficiency of a plunger pump with the sturdiness of a diaphragm seal to eliminate leakage. Available in a wide range of materials and diaphragm designs, they offer a diverse range of fluid handling solutions. With flows up to 270 gph and pressures up to 3,100 psi and certified to NSF/ANSI/CAN 61 and NSF/ANSI 372, they have the features and functions needed for water treatment and industrial applications. Options include a Hypo-Valve for effervescent fluids to avoid the loss of prime caused by trapped gases and maintains accuracy while dosing; onboard hydraulic diagnostic windows that allow for easy evaluation of pump performance and troubleshooting; and Pulsalarm leak detection that increases operator and process protection. 800-333-6677; www.pulsa.com

ScreencO Systems Patz Shaft Drive Pumps

Patz Shaft Drive Pumps, distributed by ScreencO Systems, are vertical pit pumps that can be used in aboveground or underground storage tanks and include choices of single- or three-phase electric motors. They have high solids and grit capacities with large centrifugal pumps and hardened steel impellers. High capacities include the 3333 series up to 500 gpm and the 4444 series up to 1,580 gpm. They can be deployed in depths from 3 feet to 12 feet, 8 inches. The 6000 and 8000 series have a three-point hitch with PTO drive and can offer up to 3,500 gpm at depths from 6 to 12 feet. They can be used with an agitator nozzle to mix and pump fast. The 616 vertical prop agitator is capable of mixing at 9,000 gpm, keeping grit and solids mixed at pit depths of 6 to 16 feet. 208-790-8770; www.screencosystems.com

SEEPEX Smart Air Injection

Smart Air Injection (SAI) is a SEEPEX customized system solution for pumping over long distances. The system uses compressed air and polymer injections to convey sewage or other media with a dry matter content of 20 to 40%, over distances of up to 1,000 meters. This combination ensures a low-pressure level in the delivery line, as well as low friction, which translates into a long life cycle and low operating costs. The system is easy to integrate into existing automation and control systems; reduces the pressure rating of the pipework and valves; and is an enclosed pipework system, eliminating unpleasant odors or rainfall dilution. Open hopper systems with Smart Conveying Technology reduce maintenance time by up to 85% with the maintain-in-place design, requiring no disassembly of discharge pipework. 937-864-7150; www.seepex.com

Smith & Loveless CAPSULAR Underground Pump Station

CAPSULAR Underground Pump Stations with Safe-Stair entry from Smith & Loveless provide end-users with efficient and long-lasting high-capacity pumping performance and superior operator safety and operations and maintenance costs. Designed for continuous human occupancy, the pumping system features reliable flooded suction pumps that deliver up to 29 mgd of wastewater conveyance. Accessible via the Safe-Stair entry module, entering the system is not considered confined-space entry. The system offers future adaptability through its multipump design and ability to adjust rotating assemblies and/or controls. The entire system is prefabricated and shipped directly to the job site. Excavation and installation services are also available. 800-898-9122; www.smithandloveless.com

Vaughan self-priming chopper pump

Self-priming chopper pumps from Vaughan are designed to be easily accessed outside of the wet well while pumping waste solids at heavy consistencies, without plugging or dewatering of the solids. They eliminate the loss in production and mess, along with making it easy to service the pump to get it back in operation. 888-249-2467; www.chopperpumps.com

Vogelsang XRipper

XRipper grinders from Vogelsang are designed with twin Ripper Rotors, which are one-piece cutting elements that ensure maximum torque is delivered when grinding tough solids. The refined design of the teeth is suitable for shredding wipes, plastics, rags and other troublesome waste. The rotors allow the unit to be easily serviced as compared to other units that feature individual blades and spacers. By loosening just a few bolts, the wet-end of the unit is pulled from the housing and easily serviced. Units can be serviced on site in a matter of hours, as opposed to days. Drop-in replacement units are available for all common pipeline, channel, lift station and hopper-fed applications. 330-296-3820; www.vogelsang.info

Valves

Flomatic Model 4082S6 ball check valve

Designed for use with sewage pumps and applications involving viscous liquids or slurries, Flomatic’s Model 4082S6 ball check valve design is simple yet efficient. The AIS-compliant valve is constructed in 316 stainless steel with an access port, flanged class 150 connection, a Nitrile (Buna-N) covered metal sinking ball, and stainless steel fasteners. Additional components such as a proximity sensor are available. They are designed with no moving parts except for the ball, which automatically moves out of the flow path, minimizing headloss and maximizing efficiencies. 800-833-2040; www.flomatic.com

JAECO Fluid Systems stainless steel check valves

JAECO Fluid Systems offers a broad line of inline check valves to control backflow of critical fluids. They feature male-x-male NPT threads and a durable design that is suitable for injection line and metering pump applications. They are 316 stainless steel, compact, and provide maintenance-free, dependable service. Options include spring-loaded ball or poppet valves with 2 or 10 psi cracking pressure and Viton or PTFE O-rings. 877-778-3456; www.jaecofs.com