May Product News

Featured products of May

Interested in Pumps?

Get Pumps articles, news and videos right in your inbox! Sign up now.

Pumps + Get Alerts

ECD Introduces AC10 Air Blast Spray Cleaner

The AC10 air blast spray cleaner from Electro-Chemical Devices is an automatic sensor cleaning system designed to decrease sensor maintenance cycles and maintain sensor measurement accuracy in turbid water conditions by preventing the buildup of biofilms and other soft coatings. The cleaner can be used as either a single channel or dual channel system with HYDRA ammonium and nitrate sensors. Combined with a sensor spray head and C22 analyzer/controller, it uses pressurized air to generate an area of high turbulence in the water surrounding the measurement end of the sensor. 800/729-1333;


Omega Introduces Clamp-on Digital Multimeters

Model HHM590 Series clamp-on digital multimeters from Omega Engineering Inc. include safety test leads, 9-volt alkaline battery, type K beaded wire thermocouple (temperature models only) and operator’s manual. Each unit has GS-Mark EN61010-1 approved voltage category III 600 V, pollution degree II and AC/DC current clamp. The meters measure 9.9 by 3.9 by 1.8 inches and weigh 10.8 ounces. 203/359-1660;


Weidmuller Offers ACT20P Bridge Signal Converter

The ACT20P bridge signal converter/isolator from Weidmuller is designed for factory and process load-cell applications that include engine and turbine strain measurement and weight or level controls. The unit will accept up to four load-cell inputs, provides 65 m/s response time and 0.05 percent accuracy. Other features include switch-selectable input and output ranging and push-button calibration. 800/849-9343;


Aquafix Offers VitaStim Nitrifier

VitaStim Nitrifier bacterial replenishment from AQUAFIX Inc. enhances wastewater treatment in aerobic systems. The concentrate contains active nitrifying bacteria, including Nitrosomonas, Nitrobacter, Nitrospora and heterotrophic nitrifiers. 888/757-9577;


Palmer Introduces J-2000 Aero Type Gauges

The J-2000 Series of aero type differential pressure gauges from Palmer Instruments Inc. feature frictionless movement and safe-slide pointers in green, yellow and red, enabling the user to set visible reminders of safe, warning and danger ranges. The gauges are available in units of psi, Pa, kPa, inches of water, millimeters of water and centimeters of water. 800/421-2853;


NOV Introduces EZstrip Pump

EZstrip technology from NOV Monoflo enables pumps to be disassembled, de-ragged, and maintained in place, reducing downtime and maintenance costs. The technology can be installed on new pumps or retrofitted into existing select Compact C and B-Range installations. No electrical disconnection is required. Suction and discharge pipe are untouched. The unit offers dry-run protection. The model range has a capacity of up to 726 gpm and 174 psi. It is available in either cast iron or stainless steel. 281/200-1200;


Schneider Electric Offers Production Energy Optimization

The Production Energy Optimization solution from Schneider Electric is an energy management and analysis tool. The PEO reduces energy consumption per unit of production, making it more predictable for forecasting purposes. 888/778-2733;


Bel-Art Offers Scienceware Vacuum Aspirator

The Scienceware vacuum aspirator collection system from Bel-Art Products includes a 1-gallon collection bottle, clear flexible PVC tubing and vacuum pump contained and protected within a polypropylene housing that doubles as a holder for the chemical- and corrosion-resistant polypropylene collection bottle. The bottle features heavy-wall construction and a self-regulating, vacuum release safety vent built into the cap to prevent implosion of the collection bottle. 800/423-5278;


Asahi Offers Frank Series Pressure Regulators

PolyPure PPn Frank Series pressure and backpressure regulators from Asahi/America range in size from 1/2 to 2 inches. The regulators are adjustable under working conditions, providing stable control over pressure, regardless of fluctuations or change in system demand. 877/242-7244;


Sodimate Introduces Sodimix Dust Emission Reducer

Sodimix dust emission reducer for slurry systems from Sodimate Inc. eliminates the dust created from screw conveyors to slurry tanks. The wetting system consists of a plunging pipe connected to the dry feeder outlet that stems into the slurry tank. Powder fed into the tank is distributed by shaft-driven impellers for premixing. The screw feeder outlet is connected to an air/water filter. Suction created by the venturi system vacuums out the dust from the screw feeder outlet passing through the filter. At the end of each batching cycle, the water supply is directed to the water filter to clean and discharge all residual particles into the slurry tank. 773/665-8800;


Datastick Offers Acoustic Monitoring Package

The Vibration Acoustic Monitoring package, made to be used with handheld Vibration Spectrum Analyzers from Datastick Systems Inc., includes noise-canceling headphones with safety earmuffs, both passive and active cancellation, an inline amplifier for sound level adjustment, cable and connector. Used in the service of pumps and compressors, VSAs can be used to detect structural problems caused by vibration that could harm sensitive equipment in data centers. 408/987-3400;


Hach Introduces HQd Benchtop Meter and Ion Selective Electrode Probes

The HQd benchtop meter and IntelliCAL ion selective electrode probes from Hach Co. are designed to test water quality and automatically recognize the testing parameter, calibration history and method settings to minimize errors and setup time. The benchtop meter can provide data transfer through USB ports and two-way communication to both PC and lab automation equipment. The probes, which test ammonia, ammonium, fluoride, chloride, and nitrate join the existing pH, dissolved oxygen, conductivity, BOD, ORP and sodium probes. 800/227-4224;


BinMaster Introduces SmartBob-TS1 Sensor

The SmartBob-TS1 sensor from BinMaster Level Controls is made for bins up to 60 feet tall. The continuous level measurement sensor weighs less than 10 pounds and measures powders, granules, pellets, plastic resins and dry bulk solids. Data generated can be viewed from a control console mounted at the base of the bins, on a PC with eBob software or sent as automated alerts and e-mails to a smart phone via BinView Web-based software. 800/278-4241;


AEGIS Offers SGR Bearing Protection Ring Kit

The shaft ground ring universal mounting kit from AEGIS includes grounding ring and mounting hardware for most motor designs. The ring prevents electrical fluting damage in the bearing, bearing noise, repairs and downtime by channeling VFD-induced bearing currents to the ground. 207/998-5140;


Stahlin Introduces PolyStar Polycarbonate Enclosures

PolyStar polycarbonate enclosures from Stahlin Non-Metallic Enclosures are made to withstand rain, sleet, snow, splashing water and hose-directed water. Available in five sizes, the enclosures feature an easy to remove lid, integrated lock hasp, flush-fit side-mount swing panel and DIN rail system. 616/794-0700;


Siemens Introduces AquaCarb 1240CAT Catalytic Carbon

AquaCarb 1240CAT catalytic carbon water treatment from Siemens Water Technologies uses coconut shell-based carbon for chloramines, hydrogen sulfide and hydrogen peroxide removal. Applications include the removal of H2O2 in semiconductor wastewater or groundwater remediation systems using UV oxidation. 866/926-8420;


JWC Introduces Sludge Monster Grinder

The Sludge Monster grinder from JWC Environmental is designed to protect sludge pumps, heat exchangers, centrifuges and other dewatering equipment from clogging with rags and debris. The grinder processes 274 gpm and can be used in scum line applications. 800/331-2277;


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.