Product News: March 2022

Browse the latest products exclusively for the water and wastewater treatment industry

Product News: March 2022

OZ Lifting Products stainless series
OZ Lifting Products’ stainless steel range includes chain hoists, trolleys and beam clamps, all designed for use in corrosive environments. The centerpiece of the line is the lightweight stainless steel chain hoist, which helps lift loads with minimal effort but is durable enough for the industry’s most demanding applications. The hoists feature fully enclosed gearing; fully machined lift wheel; weatherproof holding brake; roller bearings on all gears and shafts; and forged stainless steel hooks and safety latches. Chain hoists, like the trolleys, are available in 1/2-, 1- and 2-ton capacities. The stainless push beam trolley fits most I, S and W beams and has precision ball bearing trolley wheels. The beam clamps are available in 1 and 2 ton capacities. All products in the line are made from Type 304 stainless steel and come with individual test certificate and serial number. 800-749-1064;

Patterson Davit Cranes
Give your operations a lift with Patterson Davit Cranes, available in ½-ton and 1-ton capacities. The low maintenance, easy-to-assemble design offers adequate reach to accommodate lifting large loads within tight spaces, and a boom that can be adjusted to nearly 45 degrees to allow for clearance over obstructions such as handrails. Built for durability, it comes standard with a hot-dipped galvanized finish and stainless steel hardware to prevent rust and corrosion in wet work environments. Following Patterson’s tradition of safety-focused innovation, the davit features a reliable brake to keep loads in position without creeping. For over 160 years Patterson has been a trusted supplier of winches, rigging, fittings and custom products for lifting applications. Patterson Davit Cranes are made in the U.S.A. and deliver on the company’s promise of helping businesses run safer, easier and faster. Find out how Patterson can improve employee safety and positively impact your bottom line. 800-322-2018;

Flomatic Valves Flo-Flex Model 345 foot valve
Flomatic Valves’ latest model of AIS-compliant foot valve flapper style swing check valve is the Flo-Flex Model 345. Available in sizes 3- through 12-inch, the Model 345 is designed according to ANSI/AWWA C508 standards and is constructed in a corrosion-resistant, fusion-bonded, epoxy-coated ductile iron body featuring a 316 stainless steel strainer and class ANSI 150 flange connections. Its screen open flow area is over three times the open area of the nominal area pipe size while the one-piece molded disc allows 100% full flow in the open position. The valve features a number of functions, including a fast-paced 45-degree valve-seat angle for short disc travel, non-slam high performance resulting in the reduction of water hammer, optional drilled/tapped/plugged raised boss for easy installation of gauges or accessories and a low head loss design. It is specifically designed to seal securely and tightly to minimize pump suction losses. 800-833-2040;

Endress+Hauser Proline Prosonic Flow W 400 flowmeter
The Prosonic Flow W 400 flowmeter brings the modern technology of Endress+Hauser’s Proline device series to clamp-on ultrasonic flowmeters. The W 400 clamp-on and I 400 insertion units provide comprehensive process monitoring with long-term cost efficiency and extensive diagnostics. These sensors pair with Endress+Hauser’s Proline 400 transmitter to provide a complete flow metering solution. The flowmeter uses a nonintrusive, clamp-on measurement method, with its ultrasonic sensors mounted directly on a pipe’s exterior. This provides safe measurement of many fluids, independent of their conductivity or other properties. The flowmeter’s IP68 Type 6P submergence-rated ultrasonic sensors provide long-term and reliable operation, requiring little maintenance. This makes them suitable for use in harsh process and ambient conditions, able to withstand temperatures from negative 40 to 266 degrees F. 888-363-7377;

QED AutoPump AP4 Ultra Xtreme pump
QED Environmental Systems’ new AutoPump AP4 Ultra Xtreme pump is designed for the most extreme landfill and remediation pumping applications. The exclusive self-cleaning vortex action and proprietary surface finish on internal components improves performance, allowing pumps to operate up to 10 times longer than the AP4 Ultra pump between cleanings. The pump utilizes the same unique, non-stick coating and polished metal internal components as the QED AP4 Ultra and Ultra High Temperature pumps with their exclusive AutoPump Xtreme self-cleaning action. It is available as a short, bottom-loading pump in either a standard AP4 Ultra or AP4 Ultra High Temperature pump. 734-995-2547;


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.