Endress+Hauser Micropilot FMR6x radar level instrument
Endress+Hauser’s Micropilot FMR6x 80 GHz free space radar level instrument is suitable for use in tanks and silos with complex geometries, obstacles, baffles and/or nozzles. Its small beam angle of 3 degrees provides level measurement at distances up to 410 feet with accuracy up to 1 mm. Outputs include 4-20mA with HART and an optional open collector switch output or two 4-20mA outputs. The instrument’s antenna is designed to resist sticky buildup and condensation and built-in mapping performs false echo suppression, easing commissioning. The FMR6x is suitable for use in SIL 2 and SIL 3 hazardous locations. 888/363-7377

LUDECA Easy-LaserR XT660 belt alignment system
The LUDECA Easy-Laser XT660 laser shaft alignment system offers dot laser measurement technology, allowing for measurements on larger machines and over longer distances. Advanced measurement capabilities, such as continuous sweep and multipoint, are now available. The rugged measuring units with integrated Bluetooth wireless have operating times up to 24 hours. Custom PDF alignment reports can be exported to a USB flash drive or via Wi-Fi directly to email for documentation. 305/591-8935

Nidec Motor Corp. inverter duty vertical TEFC motors
Nidec Motor Corp. vertical totally enclosed fan cooled (TEFC) inverter duty motors are for use on turbine, mix flow and propeller pumps and range from 5 to 300 hp. They are suitable for VFD operation per NEMA standards. The pump shaft is extended through the hollow shaft, so adjustments required to lift impellers and give a running clearance with the pump casing can be made by a nut threaded on the shaft at the top portion of the motor. 888/637-7333

ProComSol HM-BLE HART Modem
The HM-BLE HART Modem from ProComSol contains a rechargable Li-ion battery that lasts for days on a single charge. The low energy features of the Bluetooth 4.0 standard also allow for longer device life between charges. The connect between the modem and the hand held device is wireless, so there are no wires to trip over, and can be used to configure hard-to-reach HART devices safely from the ground.  216/221-1550

Sensorex SensoPro conductivity monitoring system
The SensoPro Toroidal Conductivity Monitoring System from Sensorex combines a TCS3020 probe with the new EX2000RS transmitter, featuring Modbus communication for robust system integration. The TCS3020 probe used in the SensoPro system measures conductivity using toroidal sensing technology. These sensors don’t cause polarization or become fouled, and they rarely require maintenance. The transmitter includes one analog output and can monitor conductivity, percent concentration, total dissolved solids and salinity. 714/895-4344

Hayward Flow Control TBH Series Ball Valve 
The Hayward Flow Control TBH Series True Union Ball Valve with System2 Sealing Technology delivers extended lifetime performance versus conventional valves. The System2 technology incorporates a floating seat design, utilizing the valve’s upstream seat as a backup to the downstream seat while enhancing the sealing of the downstream seat. 888/429-4635

A.Y. McDonald Mfg Co. 8300 E-Series Jet Pump 
The all-iron 8300 E-Series Jet Pump from A.Y. McDonald Mfg Co. is offered in 1/2 through 1 1/2 hp with flows up to 32 gpm. It has a 1-inch outlet and 1 1/4-inch inlet and contains an easy switch between 115 and 230 V and a 304 stainless steel insert on the impeller. 800/292-2737

Walchem W900 Series Controller
The Walchem W900 Series Controller gives complete control of chemical metering pumps and valves in a broad range of water treatment applications. With easy, icon-based programming on the large touchscreen display, the W900 can be configured to control multiple outputs using one of many pre-engineered algorithms. Four I/O slots permit flexibility to utilize almost any type of sensor including pH/ORP, conductivity, disinfection, fluorescence, temperature, level and flow. Internet connectivity allows for control via remote access. 508/429-1110

Badger Meter Dynasonics iSonic 4000 flowmeter
Badger Meter’s Dynasonics iSonic 4000 flowmeter accurately measures flow rate and total volume of water and other liquids flowing through weirs and flumes. It employs a noncontact ultrasonic level sensor to measure the water level and is programmed using three front panel push buttons, offering a wide variety of primary flow elements. It interfaces with most SCADA systems, and sends level, flow rate and total volume information over Modbus RTU. A rugged powder-coated aluminum enclosure protects internal components and extends asset life. 800/876-3837

Godwin Pumps, a Xylem brand, NC150S Dri-Prime pump
The NC150S diesel dewatering pump from Xylem features Godwin Field Smart Technology that provides remote monitoring and control of the pump from any smartphone, tablet or desktop computer. Cellular and satellite connectivity and GPS enables the tracking, monitoring and control of the pump in real time, wherever it is located. The pump also features Flygt-N-Technology for self-cleaning reliability and sustained hydraulic efficiency. A sight glass makes it easy to tell when oil needs replacing, and a 25 percent increase in pump shaft diameter enables longer pump life. 856/628-6294

Agru America PE pipes and fittings
Agru America’s pipe and fittings are made from polyethylene 100/4710 for durability and corrosion/abrasion resistance. The products available include large diameter pipe, HDPE pipe fittings, Mine-Line pipes, electrofusion fittings and equipment, ball valves, metric solutions and semi-finished products. 800/373-2478

Honeywell’s Miller Falcon Edge self-retracting lifeline system
Honeywell’s Miller Falcon Edge WRL series is designed to protect workers who are tying off at foot level or working near sharp edges by ensuring the lifeline remains intact if a fall were to occur over an edge. Available in 20-, 30- and 50-foot cable lengths, it is effective for at-height work situations with the capacity to support user weights up to 420 pounds in all connections at foot level and above, including horizontal, vertical and overhead mounting. The system includes a galvanized steel cable lifeline with carabiner, tagline and integrated shock absorber. 312/545-3524

Delta CP2000 Series control drive
Delta’s CP2000 Series control drive utilizes intelligent PID control to provide energy efficiency and a power range spanning from 1 to 840 hp. The drive uses derating to achieve single- to three-phase conversion for remote pump motors, and allows for a wide range of input voltages, including 230, 480 and 600/690 volts AC. The Sensorless Vector Control built in to the drive offers response to load torque increase and decrease that satisfies requirements for load changes.

FIBOX Enclosures Instrument Protection Window
FIBOX Enclosures Instrument Protection Window minimizes the chance of an arc flash occurrence. The nonconductive polycarbonate plastic IPW creates a dry, dust-free and secure environment to allow access to only certain sections within the underlying enclosure. The IPW is fully UL listed and rated NEMA 4X and can be attached to any manufacturer’s enclosure. It is available in two sizes with either an opaque or transparent cover and several locking options. 888/342-6987

Bionomic Industries’ Series 7000/8000 Venturi Scrubbers 
Bionomic Industries announced a new version of its 7000/8000 Venturi scrubber series that is fully integrated and pre-engineered, complete with recirculation pump, piping networks, instrumentation and automated controls. Units designed for outdoor installation are available with a freeze protection package. The systems come complete with all necessary dimensional, weight and instructional information along with a system piping and instrumentation diagram and process flow diagram, giving all material balances. 800/311-6767

Koch Membrane Systems nanofiltration and reverse osmosis products
Koch Membrane Systems’ Fluid Systems nanofiltration and reverse osmosis product lines are available in standard 8-inch FRP hard overwrap configuration in standard and high area construction, and are listed under ANSI/NSF Standard 61. The Fluid Systems line includes multiple products engineered to serve in potable and industrial water applications, including: high TDS industrial streams and seawater desalination; wastewater effluents; and water softening, seawater sulfate removal and organics removal. 888/677-5624