Product News - July 2020

Product News - July 2020

Flomatic Valves Model Cycle

The Model Cycle Gard IV CB152SST from Flomatic Valves is a stainless steel, direct-acting, constant-pressure pump control valve with tappings. The body is equipped with 1-inch NPT-size female inlet threads and 1-inch NPT union end female outlet connection. The valve’s standard pressure range is 15 to 75 psi with an optional 15 to 150 psi range. The valve body maximum pressure rating is 400 psi. All of the valve’s internal parts are corrosion resistant with a stainless steel spring and fasteners for long service life. It maintains a preset operating pressure, reduces rapid pump cycling and is proven protection for wells and booster pumps.


Generac Industrial Power G4.5L engine

Generac Industrial Power’s G4.5L naturally aspirated engine has an engine block that offers integrated oil to water cooler for reduced oil temperatures and increased oil life. Five four-bolt main caps provide increased strength and rigidity. A forged crankshaft provides superior strength and durability with precision balance for long bearing life and reduced noise, vibration and harshness. Forged connecting rods with fracture-spilt caps provide strength and reduced cap shift, improving bearing life. High-performance cast aluminum pistons are designed for long engine life. Optimized skirt profile reduces friction and scuffing while chrome-coated piston rings ensure long life and reduce wear. A front-end drive with automatic belt tensioner extends the engine’s life and reduces maintenance.


IWAKI America Walchem Fluent wastewater software tool

IWAKI America’s Walchem Fluent is a cloud-based water treatment management software tool that is available on the W600 and W900 series Walchem analytical controllers. It provides the ability to monitor and control all aspects of processes remotely with your computer or smart device. Users can access current and historic data and also export graphs or files for reporting needs. Programmable alarms with customizable escalation ensure quick identification of critical process issues.


Watts SpecHUB specification tool

SpecHUB from Watts is a one-stop project specification tool that helps engineers, architects and design-build contractors specify with planning. Watts products can be specified and selected according to building requirements and codes. SpecHUB can save time when researching products with instant access to product information, and it can create written specs, plumbing schedules, building information modeling files, submittals and more.


Fluoramics Bust That Rust penetrating oil

Bust That Rust from Fluoramics is engineered to provide rust-breaking capabilities. Its foaming action allows the penetrant to soak deep into and beyond the areas to which it is applied. Solvent free, it will not evaporate, and it lubricates while breaking through existing rust. Bust That Rust will also help prevent new rust from forming. It comes in an 11.5-ounce aerosol can for ease of application, along with an attached straw for smaller or hard-to-reach areas. Bust That Rust is suited for use on nuts/bolts, padlocks, shafts, flanges, hinges and all other rusted metal parts.


Thermo Fisher Scientific OdaLog gas data loggers

OdaLog gas data loggers from Thermo Fisher Scientific, distributed in the U.S. by CAS DataLoggers, are used to record the level of hydrogen sulfide emissions and other gas emissions in pumping stations, manholes and sewer lines. Originally established in Australia in 2009, the OdaLog was designed in conjunction with wastewater authorities to survive the hot and humid conditions found in those areas while recording parts per million gas levels. It comes in three models: the Type 2L-SL with a standard sensor, the Type L2-LL with a long-life sensor and the Type RTx with a cellular modem. Bluetooth is available on all of the loggers, and they are supported by OdaStat software for device configuration.


Endress+Hauser Netilion Industrial Internet of Things platform

Endress+Hauser’s Industrial Internet of Things solution platform, Netilion, is an ecosystem combining digital services and system components to improve the life cycle and asset management, maintenance and support of instruments, and analyzers. Netilion keeps track of installed base, documentation and data management, and instruments’ performance and health status. Netilion’s digital services available today are scanner, analytics, health, library and value. These digital services can be used separately or in concert to improve the management, maintenance and support of instrumentation systems, regardless of instrument or analyzer type or vendor.



Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.