New Water Tools Flow In

The American Water Works Association’s ACE13 will showcase the most innovative products and services from all aspects of the water industry.
New Water Tools Flow In
1 AA Thread Seal Tape

Everything water will be under one roof in June, as the American Water Works Association’s 2013 Annual Conference & Exposition (ACE13) is coming to Denver, Colo. June 9 – 13. More than 450 service providers will exhibit, showcasing the most innovative products and services from all aspects of the water industry. Exhibitors will offer hands-on understanding and expert insights from pipes to valves, meters to hydrants, engineering services to tank-related products, membrane filtration systems to laboratory equipment, security to wastewater and more.

Here’s a look at just a portion of the products and services that will be featured.

AA Thread Seal Tape

High-density, cross-laminated joint wrap from AA Thread Seal Tape can be used for both standard and wide joints up to 24 inches in diameter. It provides protection against punctures and tears where they are most likely to happen due to sharp metal from sheared heads on mechanical joints. It is available in 100-foot rolls, and can be cut to a specific length to wrap a vast range of joint widths. It is an easy and economical way to protect joints from external corrosion for the life of the pipeline. 847/526-2120;

Analytical Technology

The Q46H residual chlorine monitor from Analytical Technology continuously monitors free or combined chlorine directly using a polarographic membrane sensor. Monitors are available with one of three digital communications protocols (Modbus/Profibus/Ethernet) or three 4-20 mA outputs for chlorine, pH and temperature. This system is also available pre-wired and pre-plumbed with optional sample flow controls, and mounted to a PVC back plate. 800/959-0299;


Anthrafilter provides filter media replacement service across North America. The company services all types of filters, including gravity, pressure, traveling bridge-type systems and others. They perform under-drain repairs, removal, disposal, supply and installation. Anthracite filter media, filter sands and gravels, garnet, greensand and activated carbon are removed. The method is efficient, clean and safe. 800/998-8555;

Aqua-Aerobic Systems

The Aqua UltraFiltration Membrane System from Aqua-Aerobic Systems offers a compact, T-rack design, zero break fibers and no air scouring. The multibore fibers are made of polyethersulphone with seven capillaries per fiber for superior strength. The alternating top and bottom feed and inside-out filtration flow provides uniform filtrate and backwash flows to minimize plugging, chemical usage and cleaning frequency. They are ideal for reverse osmosis pre-treatment plants and drinking water, industrial water, tertiary wastewater, and reuse applications requiring low effluent-suspended solids or phosphorus. 800/940-5008;

ASA Analytics

The ChemScan mini oP in-line analyzer from ASA Analytics is ideal for Sequesterant monitoring where combinations of Poly and Ortho-Phosphate are used. It utilizes years of experience and proven technology to provide reliable and accurate analysis of the ortho-phosphorus fraction. The device has been designed from the ground up to minimize maintenance requirements, including large ID sample tubing to eliminate plugging. It only needs quarterly service for reagent change out. 262/717-9500;

Badger Meter

The Dynasonics DXN portable clamp-on ultrasonic meter from Badger Meter is designed for systems engineers to quickly troubleshoot problems and verify sensor, pump and valve flow performance during system commissioning and diagnostics. Non-invasive, portable and easy to install, it captures more than 50 flow readings per second and automatically switches from transit time to Doppler modes as needed. Applications include clean, solids-bearing or aerated liquids in closed full pipes 1/2-inch and larger. 262/639-6770;

Blue-White Industries

The ProSeries-M M-2 peristaltic metering pump from Blue-White Industries is designed for use in small to mid-sized municipal water and wastewater treatment systems. It permits standardization to a single pump model, because it can be used with a wide variety of aggressive and viscous chemicals. The firmware is field upgradable, and the pump has feed rates from .007 to 15 gph, pressures to 125 psi, a 200:1 Turndown Ratio, 4-20mA input and output (dual input ready); industrial ethernet, Profibus, ProfiNet and Modbus. 714/893-8529;

Brentwood Industries

The SedVac sludge removal system for drinking water plants from Brentwood Industries cleans the sedimentation basin floor, removing solids without clogging, regardless of influent quality. Its header is designed to engulf and funnel the sludge blanket to the discharge hose. Powered by industry proven cable-drive technology along a guide track anchored to the basin floor, it is capable of operating daily or continuously in plants up to 380 feet long. 610/374-5109;

Caldwell Tanks

The TAP-APP or Air Pulse Protection mixing system from Caldwell Tanks is an active mixer that utilizes pulses of air to efficiently mix potable water storage tanks. It incorporates advantages of active and passive mixing technologies by consistently mixing while using no moving parts within the water container. This patented mixing technology greatly reduces typical tank mixing times, even in tall or large capacity tanks, which allows the use of intermittent pulsing cycles, reducing operating costs. 502/964-3361;

Calgon Carbon Corporation

Calgon Carbon Corporation’s Potable Water Service (PWS) Program makes Granular Activated Carbon (GAC) more economical and environmentally friendly. Through the service, the GAC a utility needs to achieve quality standards is engineered, delivered and installed by company professionals. Payment is on a monthly or quarterly basis. When a municipality’s activated carbon becomes saturated, the spent carbon is reactivated through the company’s Custom Municipal Reactivation (CMR) process, for an even greater economic and environmental benefit. 800/422-7266;

Cambridge Brass

The Cambridge Coupling from Cambridge Brass connects any two pipes of varying sizes and materials. It can attach to any pipe material through a wide range of sizes, which reduces repair time and required inventory. Installation is simple and requires minimal tools. It connects to a variety of pipe styles and sizes. 800/724-3906;

CertainTeed Corp.

Certa-Lok C900/RJ restrained joint PVC pipe from CertainTeed Corp. is a non-metallic joint-restraining system designed for use in municipal water and fire protection systems and other restrained joint applications. It requires no special heat-fusion equipment, saving contractors a significant amount of time and money. Joints are assembled as the pullback continues, so streets remain open and clear. 866/284-7473;

Data Flow Systems

Symphony - Harmonious Pump & Flow Management from Data Flow Systems utilizes SCADA to coordinate the system-wide operation of sewer lift stations for the purpose of reducing force main pressures and equalizing flow into a wastewater treatment plant or master. The result is a significant reduction in energy costs and a solution to daily peak flow and pressure spikes. It addresses the random operation of each lift station operating on a common force-main, and synchronizes the pumping activity on a minute-by-minute basis. 321/259-5009;


Denso’s Petrolatum Wax Tape System provides above and belowground protection to pipelines, fittings, tank bases, steel structures and more. The systems can easily be applied by hand to minimally prepared surfaces in arctic and tropical temperature environments. 888/821-2300;

DN Tanks

AWWA D110 prestressed concrete tanks from DN Tanks can be used for potable water, wastewater, chilled water and other liquids. They offer expanded construction capacity, technical expertise and proficiency in multiple types of proven tank designs to provide customized liquid storage solutions. They are designed to meet varying project requirements with the ability to withstand seismic activity, extreme climates and severe site conditions. 855/368-2657;

Eagle Microsystems

The VF-100 feeder from Eagle Microsystems is ideal for feeding dry chemicals in water and wastewater systems. It is constructed of stainless steel and has direct drive to ensure optimum performance in harsh environments. It is available with a large range of options including solution tanks, wetting cones, extension hoppers, stands and custom controls. It is durable, reliable, fully customizable, and comes with a two-year warranty. 610/323-2250;


ECC floating ball blankets provide highly effective solutions to difficult water storage problems for municipal utilities. By placing a sufficient quantity of hollow plastic balls onto the surface of a liquid, the balls automatically arrange themselves into a close packed formation over 91 percent of the surface area. 910/245-2241;


The Storz Nozzle Connection from EJ is an option for all the company’s WaterMaster BR250 and CD250 model fire hydrants. This connector provides a quarter-turn pumper nozzle attachment, matched with a ductile iron cap. Remove or install the cap using various square- and pent-size standard operating nuts, along with Storz C wrench outer lugs. Existing WaterMaster hydrants can be retrofitted with a new nozzle in both 4- and 5-inch sizes. The design provides consistent cap appearance and colors. 231/536-4543;

Elster Perfection

Hydrosert stainless steel adapters from Elster Perfection products are available in both male and female in sizes 3/4 through 2 inches. They allow the installer greater flexibility when installing HDPE to stainless components such as gate valves or air release valves. The product line of no-lead connections provides a quick, easy to install, leak-proof connection and repair for HDPE potable and wastewater systems. 800/544 6344;

Emerson Process Management

The FCL free chlorine measuring system from Emerson Process Management doesn’t use an expensive sample conditioning system or messy reagents to control pH. Instead, it automatically compensates for pH changes in the sample using a membrane-covered amperometric sensor. A constant head overflow sampler ensures correct sample flow to the sensors. It is available with the easy-to-use 1056 intelligent analyzer. 800/854-8257;


The OUSAF11 sensor from Endress+Hauser is designed to measure optical absorbance by a process fluid. Using visible and near-infrared wavelengths of light, it is ideal for product loss detection, interface detection, and suspended solids and turbidity measurements. The sensor emits light in both the visible and near-infrared regions, and absorption by the process fluid is determined using an optical sensor mounted in the sensor head. 888/363-7377;

Farwest Corrosion Control

The POWERMAG 1000 from Farwest Corrosion Control is a cathodic protection controller designed to automatically provide a constant, IR-free potential to internal water tank surfaces using magnesium anodes without the need for AC power, batteries or any other external power. The system, which is simple to install and easy to use, enables full control over low maintenance sacrificial magnesium anode systems with no over-voltage issues. It requires no external power or batteries. 310/532-9524;

Fluid Conservation Systems

The TriCorr Touch from Fluid Conservation Systems uses information gathered from acoustic leak noise sensors placed at intervals along a pipeline to identify and locate leaks in a water distribution system. It automatically runs 55 different filter combinations on the correlation data, which allows it to check the quality of the results and optimize filter settings as required, until the clearest and most accurate result is presented. 800/531-5465;

Filtronics Inc.

EM-mini packaged water treatment systems from Filtronics are factory assembled, fully self-contained and specifically designed for applications from 5 to 100 gpm or less. Available in standard configurations, they feature a smaller footprint at the lowest capital cost in the industry. To optimize performance, they utilize NSF certified Electromedia, which allows higher filtration rates, minimal chemical dosage, and eliminates the need for replacement. 714/630-5040;

Fisher Tank

Welded steel tanks from Fisher Tank provide safe, economical water storage for municipalities and water treatment facilities. Designs can include aeration/mixing systems, ladders, handrails, exterior piping and appurtenances as dictated by the site, weather conditions, usage and other factors. Welded steel tanks offer flexibility in design, exterior paint, future modification options, and minimal maintenance costs. 803/359-4173;

Ford Meter Box Company

The FS300 stainless steel saddle from Ford Meter Box Company incorporates a redesigned band with new gasket technology to produce a saddle rated for 250 psi working pressure. Available in 2- through 36-inch pipe sizes, the saddle offers tapped outlet threads in sizes 1/2 through 2 inches. 800/826-3487;

Grundfos Pumps

Hydro MPC BoosterpaQ systems from Grundfos Pumps can be used in a wide array of different applications, including pressure boosting, municipal water transfer, industrial process, and HVAC applications. They are designed to meet specific customer demands for capacity and control. The intelligent cascade control ensures the optimum number of pumps required to meet demand runs at any time. 800/921-7867;

Hach Company

The Hach AF7000 streaming current monitor  was designed for the optimization of coagulation processes in drinking water. Partnering a simple and straightforward layout with an optional automatic flush feature, it allows for easy access to perform routine maintenance, while maximizing uptime and keeping your readings accurate. Its heavy-duty construction and fast response allows for accurate 24/7 monitoring of source water. 800/227-4224;

Halogen Valve Systems

The Terminator Actuator emergency shut-off system from Halogen Valve Systems closes 150-pound cylinder valves containing toxic gas in less than five seconds when activated from remote sensors and switches. The operator is then required to correct the condition before manually reopening the valve to restart the system. It has a self-contained battery system that operates the motorized closing mechanism even during a power failure. 877/476-4222;

Hendrick Screen Company

Bar screens from Hendrick Screen Company can be utilized in the municipal water and wastewater, fish diversion, power distribution, industrial and OEM markets. They include passive water intake screen, flat intake and fish diversion screens, header laterals and pipe laterals, sieves and strainer screens. They are constructed from 304 and 316L stainless, and copper nickel, are ISO 9001-2000 certified, and offer design and specification preparation assistance. 270/685-5138;

Hungerford & Terry

The Ultra High Efficiency Nitrate Removal System from Hungerford & Terry features vessels completely packed with high-efficiency resin and specially designed tank internal distributors to provide uniform distribution of water and regenerant throughout the resin bed. Regeneration is counter-current to insure that the lower portion of the resin bed receives the greatest exposure and becomes the most highly regenerated portion of the bed. 856/881-3200;

Industrial Test Systems

The eXact Micro 20 dual wavelength photometer from Industrial Test Systems is waterproof and quickly does on-site testing for over 30 direct-read water quality parameters without lookup tables. It features a narrow-band wavelength filter for optimal accuracy, long-life LEDs, and a built-in cell for ultra-performance. Each parameter stores the 20 previous results for a total of over 600. It calibrates and automatically selects the optimal wavelength (525 nm or 638 nm) for each parameter. It is sold in two kits with instructions and reagents. 800/861-9712;


The 100W ERT module from Itron, when deployed with an integrated Leak Sensor, monitors a utility’s entire distribution system around the clock, acoustically surveying the integrity of the system to help find small leaks before they become large and costly. It offers full two-way communications to the meter and time-synchronized interval meter data. It can be used as a standalone leak detection system unattached to a water meter in either AMI fixed network or AMR mobile environments. 866/374-8766;

Keller America

The Leo Record digital pressure gauge from Keller America combines a high-accuracy digital pressure gauge with an integral, programmable data logger for water system pressure monitoring. This battery-operated instrument is available in pressure ranges from 0-10mBar to 0-30,000 psi, offers 0.1 percent FS TEB accuracy, and stores 57,000 data points. It interfaces with Keller’s PC-based software via USB for setup and data download. 877/253-5537;

Koch Membrane Systems

The TARGA II hollow fiber ultrafiltration system from Koch Membrane Systems offers cost ef­fective, safe, high-quality water for drinking, seawater RO pretreatment, industrial water treat­ment and tertiary wastewater treat­ment. Its membrane design is based on PES chemistry to increase chlorine tolerance, and it has one of the highest membrane packing densities per cartridge avail­able in the market. Ideally suited to meet drinking water requirements, the membrane achieves 4-log virus removal. Its intelli­gent process controls handle fluctuat­ing feed flow with minimal operator intervention. 888/677-5624;

Kruger USA

The Xtream Ultrafiltration system from Kruger USA provides a modular, compact solution for efficiently producing drinking water from surface and groundwater. It incorporates the Dow UF membrane, which has installed over 746 million gallons per day globally. The hollow fiber has a dense layer on both the inside and outside surfaces, forming a double-walled structure that makes it very durable and less prone to breakage than single-skin membranes. Its fouling resistance is improved by making the membrane surface more hydrophilic than the underlying PVDF polymer. 919/677-8310;


VIBCONNECT RF from LUDECA INC. is a wireless condition monitoring system for machine components. The sensor unit monitors machine vibration, bearing condition and temperature, and transmits the relevant data to the bridge where it is evaluated. It not only monitors the condition of roller bearings and other rotating components, but also detects damage caused by cavitation. It allows technicians to monitor plant equipment that extends over a large area without the need to install cabling. 305/591-8935;

MARS Company

The System 1 water meter test bench system from MARS Company complies with AWWA meter testing specifications and ISO 4064 standards. Its meter management software package, M3, exports meter testing results and information to the utility’s customer information system. These results are important for trending analysis and revenue recovery programs. The system provides meter testing from 5/8- through 12-inch meters, along with field test units. 800/782-5268;

Mazzei Injector Company

Injectors and Pipeline Flash Reactors (PFRs) from Mazzei Injector Company transfer ozone, a powerful oxidizer, into a water stream, solving water quality issues ranging from disinfection to reduction of organics and aesthetic issues like color, taste and odor. In wastewater applications, they provide rapid aeration within a compact footprint in force main and post treatment applications. When retrofitting an existing water or wastewater system, they can replace fine bubble diffusion systems to increase mass transfer. 661/363-6500;


The Pit Bull 26 fusion machine from McElroy is compact, lightweight and rugged, with the ability to butt fuse pipe sizes from 2-inch IPS through 6-inch DIPS. All models come standard with a 6-inch IPS insert set. It features a Centerline Guidance System and a semi-automatic locking cam system that maintains force during the cooling cycle. 918/836-8611;


The FiberShield manhole cover from McGard is constructed of a durable, fiber-reinforced polymer material with multiple security points. It is lightweight and easy to handle and transport. It attempts to eliminate the lifting and dropping injuries caused by heavy cast iron manhole covers. Weighing 80 percent less than cast iron, it exceeds an H20 traffic rating. It is installed in seconds and can be removed without bending over. It requires a McGard key to operate and has no scrap value, eliminating missing covers. 888/888-9192;


The GridBee THM Removal System with floating spray nozzle from Medora Corporation/SolarBee effectively removes trihalomethanes from potable water storage tanks and clearwells. Scalable systems include four standard sizes and easily install through a 24-inch hatch. The long-life nozzle and intake treat all incoming water and minimize THM formation downstream. Performance is guaranteed. 866/437-8076;

Mission Communications

The Manhole Monitor from Mission Communications is ideal for proactive sewer monitoring programs. It immediately notifies the technician before effluent backs up into a manhole, and tracks the time and duration of the surcharge or overflow. Early warnings of flood conditions keep the municipality compliant with the EPA. It is designed and tested to IP68 specifications for submersion and has a rugged and serviceable waterproof enclosure. Reliable, encrypted data is transmitted over 4G radios directly to a Web portal, where reports and data can be read. The monitor can be installed in under two hours, with nominal modifications needed. 877/993-1911;

Myron L Company

The ULTRAPEN PT3 from Myron L Company is an ORP and temperature tester that is as accurate and stable as benchtop lab equipment, but with the versatility and convenience of a pen. It features dip and scoop sampling for standing bodies of water and vertical streams, offering real-time analysis before atmospheric and other environmental conditions can affect the chemistry of the sample. Constructed of durable aircraft aluminum, it is fully potted for extra protection with easy-to-read LCD and one-button functions. 760/438-2021;


Read-Rite polymer replacement meter pit lids from Nicor are non-floating rectangular tank lids that are H20 load rated, ADA compliant and UV resistant. Nicor produces over 65 different molds including rectangular, circular and oval. They can be mounted to any AMR/AMI system to the underside or recessed area in the lid. Sizes range from 7 inches round to 17 x 30 inches rectangular. The lids can be combined with the company’s Hydroconn In-Line Connector for a disconnect point between the AMR/AMI endpoint and the meter’s register. 707/484-0835;

Primary Flow Signal

Primary Flow Signal’s HVT-FV Venturi flowmeter is engineered to provide traceable accuracy and survive decades of service. It can be custom manufactured to suit process requirements, in sizes from 3/8 to 180 inches, and deliver accuracies of +/-0.50 percent of actual reading. 877/737-3569;

Pristine Water Solutions

Aquadene products from Pristine Water Solutions can be used in municipal, industrial and commercial water systems. Technologies include municipal drinking water treatment programs, corrosion and sterilization programs, cleaners, commodity chemicals, polymer applications, and boiler and cooling tower applications. They have long been industry standards for reduction of iron and manganese and for maintaining lead and copper levels below national requirements. 800/562-1537;

Raven Lining Systems

Raven 405 ultra high-build epoxy lining from Raven Lining Systems is used to protect and rehabilitate water and wastewater infrastructure. Its high physical strength allows it to be designed as a structural lining in manholes, pipelines, tanks and other deteriorated structures. It has a broad range of chemical resistance, but specifically protects against the hydrogen sulfide and sulfuric acid commonly found in wastewater. It exhibits superior bond to concrete, steel, masonry, fiberglass and other surfaces. 800/324-2810;

RDP Technologies

The TEKKEM Slaker from RDP Technologies is fully automatic, requiring little or no regular operator attention. The operating system takes input from load cells to precisely monitor the weight of water and lime that are added. This information is combined with data from a thermocouple. Adjustments are made in the lime/water ratio to maintain optimum processing temperatures in the face of changes within the variables affecting the slaking reaction. 610/650-9900;

Romac Industries Inc. 

The Romac Alpha restraint coupling from Romac Industries is a wide-range, ductile iron coupling that also provides restraint. With two torque-off bolts on top, it installs in about three minutes without having to use a torque wrench. Its wide range covers ductile iron and IPS PVC pipe diameters. It is manufactured in the U.S., and has a maximum working pressure of 350 psi. 800/426-9341;

Shimadzu Scientific Instruments

The online TOC-4200 analyzer from Shimadzu Scientific Instruments utilizes the industry-standard 680-degree C combustion catalytic oxidation method to support analyses from 5 to 20,000 mgC/L full-scale. It can measure samples with TOC concentrations from 0 to 1mgC/L. A high-salt sample combustion tube kit increases the period between necessary maintenance by 10 times, while a variety of pretreatment units are available to best match a sample’s characteristics. 800/477-1227;

Siemens Water Technologies

The Clearlogx Process Optimization System from Siemens Water Technologies is an automated chemical feed system that optimizes soluble organic removal, reduces chemical costs and enhances municipal water treatment plant performance. It optimizes a water treatment plant’s water chemistry, reducing the formation of disinfection by-products while decreasing the possibility of membrane fouling. It can maximize the removal of total organic carbon (TOC) up to 50 percent, even after implementation of enhanced coagulation. 978/614-7111;

Sigma Corp.

The One-Lok Series SSLD split wedge-action restraining gland from Sigma Corp. provides an effective way to conduct repairs and service on in-ground ductile iron piping without compromising the existing system. Because the glands can be used with a two-piece backup ring, they are compatible with existing ductile iron bell x spigot pipe joints. These restraining glands are now considered the preferred means of securing new installations of ductile iron and PVC pressure pipes. 609/668-1053;

Singer Valve

The Model 106-SPI-MV from Singer Valve is a single point insertion electromagnetic flowmeter installed and calibrated in conjunction with a Singer valve to provide an accurate flow rate. It is available for valve sizes from 4 to 36 inches. With no moving parts and a single-piece design, the sensor contains nothing to wear or break, and is generally immune to clogging by sand, grit or debris. It is profiled for the valve body, further enhancing its measurement accuracy by allowing precise determination of mean velocities. It comes pre-calibrated, and can be installed with any standard Singer pilot system. 604/594-5404;

Tank Connection

RTP (rolled, tapered panel) tank construction  from Tank Connection is a top-bolted tank design ideal for use in municipal water and wastewater applications. If a project involves a single water tank or an integrated municipal water storage system, the firm offers multiple services and creative solutions. From the quote stage through order process, drawing approval, material fabrication and field installation, they provide streamlined processing and customer service. 620/423-3010;

Tank Industry Consultants

Tank Industry Consultants provides professional engineering and inspection services to water storage tank owners. The firm offers a complete line of engineering and inspection services for water storage tanks, and has been involved in more than 11,000 storage tank projects. This extensive experience coupled with the professional expertise of the firm’s engineering and field personnel result in the practical “know how” needed for a successful storage tank evaluation, construction or rehabilitation project. 317/271-3100;

Team Industrial Services

The InsertValve from Team Industrial Services is a quick and economical fix for different sized piping, providing valve control without having to replace pipe. For instance, an 8-inch valve can be installed on an existing 6-inch pipe for immediate valve control. It has mechanical joint connections, allowing for downstream pipe removal and replacement. Technicians can mirror the process on the other side when capital improvement is scheduled in that direction. 800/662-8326;

Thermal Edge

Enclosure air conditioners from Thermal Edge include condensate evaporation, programmable digital controller and a thermal expansion valve, making them ideal for temperature control inside heat-sensitive enclosures. A Condensate Evaporation Package is standard on all units. Eliminating the drain, and reducing the power consumption by using the condensate to precool the refrigerant, the units lower the load on the compressor, thereby lowering the power used. 888/580-0202;

Trihedral Engineering Limited

VTScada 10.2 monitoring and control software from Trihedral Engineering Limited is a fast, stable, all-in-one solution built for telemetry applications of any size. It supports almost any combination of PLCs or RTUs. Unique server architecture means superior hot-backup with fewer computers. A built-in polling toolset replaces expensive hardware. Instantly roll back to any past configuration. Slippy Maps allow you to pan and zoom across remote sites using smartphones and tablets. 800/463-2783;


The TrojanUVTorrent UV disinfection system from TrojanUV reduces maintenance requirements and costs while incorporating efficient technologies for large-scale drinking water disinfection. It incorporates the company’s Solo Lamp to offer medium-pressure and low-pressure high output lamp technologies. Advantages of the system include lower life cycle costs, easy maintenance and reduced environmental impact. 888/220-6118;

Underground Solutions

Fusible PVC pipe from Underground Solutions is available in diameters from 4 to 36 inches, including Fusible C-900, Fusible C-905 and FPVC. It produces a fused monolithic, fully-restrained, gasket-free, leak-free piping system ideal for trenchless (horizontal directional drilling, pipe bursting and sliplining) or conventional “open-cut” installations. The combination of standard fittings, as well as less weight and more flow for a given pressure class ensure cost savings. 858/679-9551;

Utility Service Co.

The Water Well Asset Management Program from Utility Service Co. is a custom-designed preventative maintenance program that includes regularly scheduled cleaning and monitoring to maintain peak performance, lower operational costs and extend service life. The company has partnered with Subsurface Technologies, Inc. to offer a broad range of well rehabilitation technologies, including a sustainable approach to improve and maintain well performance. It delivers asset management programs for the unique characteristics of each well. 855/526-4413;


The Verderflex Dura hose pump from Verder is available equipped with a motor-mounted variable frequency drive for increased dosing power. The user-friendly system provides installation flexibility and precise dosing/metering controls for real-world municipal and industrial chemical feed applications. It features a 10-button keypad for local control and programming, plus a Dura hose pump with one-piece flange connections, compact footprint, and increased hose life up to 40 percent. 877/783-7337;

Videx Inc.

CyberLock from Videx Inc. enables municipal water utilities to track and control access to all areas of a facility. Cylinders and padlocks are built with stainless steel components to withstand wet, corrosive environments. The locks and keys record openings and unauthorized attempts to gain entry, providing an audit report that can help water utilities meet EPA security guidelines. Re-keying will never again be necessary because the keys cannot be duplicated and a missing key can be blocked from accessing locks. Each key is programmed with access permissions based on time, date and authority level. 541/738-5500;


The LOG CORR system from Vivax-Metrotech is a field correlator mixed with a set of noise loggers and a pin-pointing tool designed to detect leaks. The number of sensors combined with the precision of a correlator make the system unique. This form of leak detection allows the operator to locate even the most difficult leaks quickly and precisely, saving valuable time. The pinpointing feature enables the operator to confirm correlations directly on site. Its GPS-based leak navigator will lead technicians to the previously correlated leak position. 800/446-3392;

Watts Water Technologies

The HF scientific HF-38Fluorimeter from Watts Water Technologies is an extremely sensitive, hand-held, ruggedized instrument designed for field-testing of toxic heavy metal contaminants in water supplies. It requires no special skill or knowledge of chemistry to operate, and is designed for use with HF heavy metal sensors. Through the use of DNA sensors, a reaction that fluoresces in the presence of a target contaminate substance, such as lead, is measured to determine the concentration of the target heavy metal. 978/688-1811;

WesTech Engineering

The Trident HS package treatment system from WesTech Engineering provides multiple-barrier protection for surface water, groundwater and industrial process water treatment. Individually and collectively, the four major treatment stages of the system maintain superior effluent performance. The multiple-barrier process is well suited for all surface and groundwater applications, including high turbidity and color, variable water conditions, enhanced coagulation operation, and cold-water conditions. 801/265-1000;


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.