Rockwell Automation AC Drives

Allen-Bradley PowerFlex 755 AC drives from Rockwell Automation have an extended power range of 900 kW/1,300 hp and 600/690 volt ratings. The common DC bus option enables users to connect the drives to a common DC bus configuration, which acts as a common energy source that feeds energy from a generating load to a motoring load. Features include embedded Ethernet port and five option slots. Option modules include I/O, feedback, safety, additional communications and auxiliary power supply. 800/227-6143; www.ab.com/drives/powerflex/755.

FCI ST100 Gas Flowmeter

The ST100 Series air/gas mass flowmeter from Fluid Components International LLC features analog and bus communications with the ability to be field changed and upgraded. Outputs utilize a modular plug-in card system. The thermal dispersion flowmeter is designed for use in aeration basins, digester gas systems, digester gas-to-cogen or CHP systems as well as in ozone and other disinfection gas systems. The unit has a backlit LCD that continually displays all process measurements, alarm status and user defined field and, when needed, instrument health and service diagnostics. Models include flow, temperature and pressure measurements. 800/854-1993; www.fluidcomponents.com.

Wahl Black Body Calibration

The Black Body line of calibration sources from Palmer Wahl, designed for the calibration and verification of infrared temperature instruments, is available in 22 models. Both cavity and hot plate types feature dull black surfaces to achieve an emissivity as close to 1 as possible. Models with built-in or stand-alone temperature controllers are available. Communication ports are available on some models, enabling the user to set points for automatic test applications. 800/421-2853; www.palmerwahl.com.

Xylem Godwin Non-Clog Pumps

Godwin NC Series portable pumps featuring non-clog Flygt N-technology from Xylem Inc. are made for sewage and bypass pumping. Designed to allow stringy solids to pass, the 3-, 4- and 6-inch pumps are available for rent or purchase. Models NC80, NC100 and NC150 are capable of flows up to 1,750 gpm and available with diesel engine or electric motor on a highway trailer or skid base. Quiet enclosures for use in residential areas are available. 704/409-9700; www.xyleminc.com.

Membrana-Charlotte Liqui-Cel Membrane Contactor

The 14- by 40-inch Liqui-Cel deaeration membrane contactor from Membrana-Charlotte utilizes polypropylene hollow fiber, contains 4,015 square feet of membrane area and has a maximum capacity of 550 gpm. It has a pressure rating of 60 psig and is NSF/ANSI 61 compliant. 704/587-8888; www.liquicel.com.

Nextteq GASTEC Sulfide detector tubes

The Gastec Sulfide Ion in Solution Detector Tube No. 211 from Nextteq provides a quick and easy method for detecting sulfide ion levels in solution. No technical training is necessary to perform the test accurately. The detector tubes are available in four ranges for specific measuring, with a total range of 0.5 to 1,000 parts per million. No mixing of chemicals is required. The direct-reading tubes produce a quantitative color-stain that pinpoints problem areas in two to three minutes. The calibration scale, printed directly on each tube, provides easy-to-read, on-the-spot results. The tubes save time by avoiding laboratory turnaround time. No color comparison chart or laboratory equipment is necessary to determine results. The color-stain ends with a clearly defined line of demarcation. 877/312-2333; www.nextteq.com.

Moyno Inc. 500 Series Pump

The 500 Series 301 pump from Moyno Inc. is designed for chemical dosing and transfer applications. Features include a reverse covered seal design between the rotor shaft that eliminates metal exposure to fluids. Phenolic housings and rotors are corrosion-resistant. Hose connections, resilient cushion and cradle mounting provide easy installation, maintenance and replacement. Suitable for direct or belt drive, the pumps have a pumping range of 0.45 to 13 gpm and pressures up to 25 psi. 877/486-6966; www.moyno.com.

Sensorex pH/ORP Sensor

The flat-surface, self-cleaning S656CD pH/ORP electrode from Sensorex combined with the CPVC S675 insertion assembly enables pH measurements to be made in pressurized tanks and mainlines. The electrode features HT gels and reduced breakage potential, with four protective pads to reduce pH glass breakage. Its flat surface measuring glass design reduces coating and buildup in turbulent flows to extend electrode life and reduce maintenance. 714/895-4344; www.sensorex.com.

Xenon Cellular Control

The T925 wireless cellular control from Xenon Inc. is designed for connecting remote sites with central control and monitoring stations through cellular networks. The remote network eliminates the need to make hardwired Ethernet connections to the Internet or to an intranet at each remote site and at the central control and monitoring station. The network operates from any location with cellular coverage. 866/571-8595; www.xenoninc.com.

BinMaster Pro Remote

The Pro Remote capacitance probe from BinMaster enables the sensor’s electronic components to be mounted 75 feet away from the sensing probe. The point level indicator is designed for hostile applications, including high temperatures and excessive vibration. The remote can be used for high, mid and low level detection of solids, liquids or slurries using a variety of probe options. 800/278-4241; www.binmaster.com.

U.S. Energy Management System

The H2Oversight Service water and wastewater management system from U.S. Energy audits, monitors and tracks in-and-outbound water usage. The service uses a closed loop waste and wastewater tracking system that captures historical and current water and wastewater invoice data, conducts an analysis of pricing and usage to identify abnormalities, ensuring that the optimal rate structure is being billed. The service also identifies all possible savings on credits, tariffs, bypass opportunities and operational savings, producing a customized plan for each client. 763/543-4600; www.usenergyservices.com.