Society’s Curious Relationship With Sludge

This content is sponsored by HUBER Technology. Sponsored content is authorized by the client and does not necessarily reflect the views of COLE Publishing. View our privacy policy.
Society’s Curious Relationship With Sludge

Interested in Headworks?

Get Headworks articles, news and videos right in your inbox! Sign up now.

Headworks + Get Alerts

As we go about our day in the water treatment profession do you ever stop and consider the uniqueness of our work? Consider sludge for instance. Not many people really give it much thought at all. When they do, it usually conjures up lurking trouble. Try this little exercise: Type in the word “sludge” on a Google search. Typically first up you will see a definition like “thick, soft, wet mud or a similar viscous mixture of liquid and solid components, especially the product of an industrial or refining process.” The definition goes on to list synonyms such as: “mud, muck, mire, ooze, silt.” Two examples given are: “The channel had become silted up with a layer of sludge” and “…dirty oil, especially in the sump of an internal combustion engine.” 

If you look a little further in your search results you will begin to see definitions and articles more familiar to our industry framing the positive attributes and possibilities with sludge. Our industry has made great strides in laying the groundwork with helping the general population understand and appreciate the nuances of sludge. However, to the average layman sludge is still a dirty word.

Changing perspectives

Even within our own industry, considering the timeline of modern wastewater treatment, the shift of viewing sludge from a nuisance to something more is a relatively new phenomenon. This is especially true in North America. The Federal Water Pollution Control Act of 1948 was the first major U.S. law to address water pollution. In the mid 1970s public awareness began to drive initiatives that led to improved mandates and regulations for the collection and treatment of wastewater to address newly identified toxic pollutants that were potentially in the waste stream. As amended in 1972, the law became commonly known as the Clean Water Act. The EPA describes on their website: “The Clean Water Act (CWA) of 1972 has been the primary Federal Law in the U.S. governing water pollution and has been central to our country’s endeavors to improve the quality of the environment.”

Treatment technologies became increasingly sophisticated to address the capture and removal of the targeted pollutants. New issues emerged. As treatment processes moved from basic primary treatment into secondary treatment, tertiary treatment and beyond, challenges related to handling and processing of the captured elements (screenings, grit and sludge) needed to be addressed.

Sending the captured materials to landfill was the most commonly employed solution; land application of sludge was also considered for agricultural purposes. It was during this time of changing perceptions and priorities with pollution control, scrutiny of the collected materials warranted a closer examination.

With the more intensive forms of treatments being employed, increased accumulation of materials emerged as having a significant impact on operations and maintenance of wastewater treatment plants. The expense of handling, transporting and disposing of these materials incurred rising costs as well. This led to the creation of technologies that could process the screenings, grit and sludge constituents to reduce the volumes for disposal and separate out useful organics for return to process.

Sludge gets a makeover

Public health and safety concerns regarding exposure to human pathogens with the use of sludge for land fill and agricultural land application techniques provided the impetus to create several EPS regulations regarding the disposal of sewage sludge. This rule also introduced standards for sewage sludge incineration. This groundbreaking regulation provided the framework to significantly expand the different safe uses for sludge. Many states followed suit with regulations for sludge treatment tailored to their unique drivers and requirements.

Monitoring perception and providing reliable education proved critical in breaking the negative paradigm of the word “sludge.” It is not clear when the term “biosolids” was officially coined. Notable groups such as the Water Environment Federation are on record championing the adoption of the term biosolids to provide a distinction as far back as 30 years ago or so.

What is clean sludge?

To be fair, the subject of biosolids is not without its detractors. Especially when it comes to the use of biosolids in places where there is potential for human exposure to human waste products and industrial byproducts. While there are a few that take it as far as envisioning conspiring agencies, organizations and individuals; the majority of concern is rightfully placed to challenge the industry to have thorough knowledge of the makeup and application through established best practices and regulatory oversight. 

When you stop and consider how wastewater is collected and treated then it is not that big of a leap to understand that not all sludges and biosolids are the same. The discharge into the specific collections system as well as area-specific influences will greatly influence the nature and makeup of the sludge that is being treated. There are broad characteristics that make it possible to consider treatment approaches like screening, thickening, clarification, digestion, dewatering, etc., within the treatment plant itself without going to great analytical depth. However, the specific makeup of the particular sludge in question can radically affect what is possible to do with it.

The term “clean sludge” would be defined by what end goal is being considered. Some common things that might occur is the screening of sludge to remove inorganic materials resident in the sludge that would compromise various processes such as digestion, dewatering, distribution, etc. There are several ways to accomplish this task through updated headworks and grit capture systems or perhaps point-of-treatment screening at places just ahead of a digester. Excess water in the sludge might employ techniques like thickening to reduce water volumes that would enhance the performance efficiencies of the aerobic digestion process. The presence of volatile solids might affect the dewater ability of sludge if digestion is not adequate in the treatment design.

When considering placing sludge out into the environment, planned sludge distributions, or uses that are in close alignment with human consumption and exposure, require greater knowledge of the makeup of the sludge itself. In particular metals concentration, pathogen inactivation and mitigated vector attraction are some examples that are important components that need to be examined and understood.

Transforming waste into resource

What is the future of sludge and biosolids? You do not have to look too far to see that with population concentrations and centralization of our cities, the collection and treatment of society’s waste will be ongoing. Pressures on infrastructure and environment will continue to create new challenges and provide opportunities to change and improve. The actions back in the mid-20th century created priorities like the Clean Water Act that radically influenced and pioneered an increasing understanding and application of pollution control techniques to great effect. As we saw, that mission has continued to evolve and change into this century.

Similarly, it is becoming increasingly clear that one-way consumptive behaviors that consume and exhaust resources are giving way to sustainable approaches such as the current popular circular economies concepts. The idea of adopting a paradigm shift away from waste-and-dispose to transforming-waste-into-resource has moved beyond a nice idea and solidly into reality. Many projects come to mind regarding sludge in the conversion of things like sludge-into-energy and biofuels.

Interestingly enough for this industry, unlike the Clean Water Act where the federal government played a pivotal role in the rollout and execution, it appears the need of resource-creating technologies is outpacing the speed of government and related regulatory drivers. The practicality and economics are aligning to where it is a ripe environment for innovating individuals and enterprises to create the momentum into this exciting new chapter and lead the way.

HUBER Technology Inc., based in Denver, North Carolina, is one of the country’s largest manufacturers of wastewater, sludge and grit handling equipment. HUBER offers multiple screening and filtration solutions for municipalities and numerous industrial wastewater and intake applications. For more information on any of HUBER’s product lines, please complete the form at

Visit the HUBER Technology, Inc. Storefront


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.