Bioremediation with Micro-Solve Solves Foaming Issue at a Texas WRRF

This content is sponsored by EGSW. Sponsored content is authorized by the client and does not necessarily reflect the views of COLE Publishing. View our privacy policy.
Bioremediation with Micro-Solve Solves Foaming Issue at a Texas WRRF

Interested in Dewatering/Biosolids?

Get Dewatering/Biosolids articles, news and videos right in your inbox! Sign up now.

Dewatering/Biosolids + Get Alerts

Problem: The initial-stage aeration basins at the Cuero (Texas) Water Resource Recovery Facility, receiving approximately 1 mgpd of wastewater, have developed a high-density foaming issue that has been around for months and has spread to basins 2 and 3. Through process of elimination operators identified that the primary cause is not related to a filamentous bacterium but is a result of the buildup present in the master lift station and on the water surface throughout the basins themselves.

Objective: To decrease the amount of foam at the water resource recovery facility.

Solution: One gallon a day or 1 ppm of Micro-Solve bioremediation solution from EGSW, alternating and splitting the dosage between the master lift station’s two wet-wells and the three aeration basins in the initial stages of the WRRF. The Bubbler mixing unit will be added to help increase the rate of bioremediation in wet well No. 1 of the master lift station.

Result: Adding mixing and oxygen in the lift station has given Micro-Solve the ability to work at an increased rate and has allowed operators to take a percentage of the allotted dosage for the lift stations and move it to the aeration basins. This was done in an effort to assist with the density of the existing foam on the water’s surface in the aeration basin. The density, color and odor have significantly improved. Most important, there is an exponential increase in the microbial population.



Visit the EGSW Storefront


Discussion

Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.