Browse the latest products exclusively for the water and wastewater treatment industry.


Blue-White MD-3 chemical metering pump 
The Proseries-M MD-3 chemical metering pump from Blue-White Industries provides precision chemical metering for the treatment of municipal water and wastewater. The hybrid MD-3 diaphragm metering pump has 2000-1 turndown ratio and provides smooth chemical dosing with no pulsation dampener required. Delivering 380 strokes per minute, the pump features PVDF wetted end fittings for over 14 inlet and outlet configurations and a zero-maintenance brushless DC drive. 

DuPont Industrial Biosciences biogas enzyme
The OPTIMASH AD-100 enzyme from DuPont Industrial Biosciences is designed to help biomethane producers improve biogas yields. The enzyme has been shown to increase biogas by 13 percent in anaerobic digesters. It breaks down organic matter, making sugars more suitable for biogas-producing microorganisms.

Spirax Sarco rotor insertion flowmeter 
The RIM20 rotor insertion flowmeter from Spirax Sarco USA uses a common electronics platform available in all new 20 Series meters and provides the same features and benefits as the RIM10, including SMART multivariable electronics for the measurement of mass or volumetric flow, density, temperature and pressure. Applications include measurement of steam and natural gas flows for fiscal or load control and heat flow calculations for chilled, hot water and other liquids and gases in 3- to 80-inch lines. 

Related: Product News - December 2010

Matrox Mura capture and decoder cards 
Matrox Mura IPX 4K capture and IP capture cards from Matrox Graphics are available with and without fans. The cards feature four HDMI inputs for direct high-resolution 4Kp60 or 2,560 by 1,600p60 capture plus H.264 decoding up to two 4Kp60, four 4Kp30, eight 1,080p60 or 16 1,080p30 streams. Applications include control rooms, digital signage and AV presentation systems. 

Neptune Abaque peristaltic pumps 
The Abaque Series of peristaltic (hose) pumps from Neptune, part of PSG, a Dover company, feature a new orange and black look, stronger rotor design and innovative hose handling system. A seal-free design eliminates leaks and product contamination. The self-priming pumps can run in forward or reverse and offer suction-lift capabilities to 25.5 feet, as well as the ability to run dry without adversely affecting performance, pressure and accuracy (no slip). Pumps are available in ductile iron and stainless steel with discharge pressure up to 217 psi, nine sizes with flow rates ranging from 0.59 to 238 gpm. 

Singer Valve deluge fire valves 
Deluge fire valves from Singer Valve are UL approved for use in high hazard areas where high velocity suppression is necessary to prevent the spread of fire. Available in three news models (electronic operated, pneumatic operated remote control and electric pneumatic operated), the deluge valves are available in globe style (3 to 8 inches) and are ANSI Class 150 with 300 flanges and grooved ends. 

Related: Industry News - July 2013

BBA Pumps stainless steel self-priming BA pumps 
Dry, self-priming BA series 316 stainless steel pumps from BBA Pumps are designed for use in corrosive environments and available in four models: BA80H (3-inch clear liquids), BA100K (4-inch solids), BA150E (6-inch solids) BA180E (8-inch solids). 

Xylem Flygt Wastewater Pump Controller 
The Flygt FGC400 self-contained, intuitive controller from Xylem features advanced monitoring and control capabilities to optimize wastewater pumping efficiency. The plug-and-play pump controller features pre-programmed functionality, letting the operator install and configure the unit to match specific wastewater pumping needs. The controller can be connected to one or two pumps and includes energy measurement, data loggers and level monitoring in one unit. The FGC400 controls pumps up to 5.5 kW or larger using external contactors. It is equipped to readily sync with external controls, including SCADA systems and can be configured via PC, USB or the HMI. 

Fluid Components International ST100 Flow Meter 
The ST100 flowmeter from Fluid Components International (FCI) is designed for measuring direct gas flow, including hydrogen, wet gas, mixed gases and dirty gases. The basic insertion style air/gas meter features a thermal flow sensing unit that measures flow from 0.25 to 1,000 SFPS. It can measure at high flow rates from 0 to 6,600 lb/hr at 29 to 87 psi. Communication options include 4-20 mA analog, frequency/pulse or certified digital bus communications such as HART, Foundation Fieldbus, Profibus PA or Modbus RS485.

Related: Special Feature: Green Pumping

Related Stories

Like this story? Sign up for alerts!