Browse the latest products exclusively for the water and wastewater treatment industry.
Greyline Instruments insertion magmeter
The ISM 5.0 insertion magmeter from Greyline Instruments measures the flow of conductive liquids in full pipes. It installs through a tap in the pipe wall and is designed for 3- to 72-inch-diameter lines. Installation through a full port ball valve allows for easy retraction and reinsertion without shutting down flow. The magmeter has no moving parts. Features include a dual-electrode sensor and continuous auto-zero function, selectable 4-20mA, 0-5 volt or 0-10 volt output. Other features include 0-500 Hz frequency output and scalable pulse output.
Flomatic Slim Line well check valves
Model 80SL Slim Line well check valves from Flomatic Corporation are designed to support the weight of up to 1,000 feet of pipe and well pump. Sizes range from 2 to 8 inches. Fusion epoxy coating is standard. The small outside diameter allows for tight fits in the well. The valves have a stainless steel body with corrosion-resistant internal parts.
Spiralift septage receiving station
The Spiralift SR septage receiving station from Franklin Electric is designed to receive, screen and separate solids. Features include a grinder, fine screening shaftless screw system, spray wash and S270-SR automatic control system with optional S270-SRH hauler station control system that collects transaction data, authenticates haulers, racks loads and supplies a receipt via a card swipe system. The units wash and compact screenings by up to 40 percent. Processed solids are conveyed for discharge into a bin, bag or conveyor. The SPIRALIFT has a stainless steel tank enclosure with quick-disconnect inlet flange. An automatic inlet valve automatically regulates internal fluid level. Options include the Taskmaster TT automated rock removal system.
Bayco Products AC-powered LED work lights
AC-powered magnetic LED work lights from Bayco Products deliver 1,200 lumens on high mode and 600 lumens on low mode. Models SL-2135 (25-foot 18/2 SJTW cord) and SL-866 (50-foot cord inside retractable reel) have two integrated magnets — one at the balance point in the middle of the handles and the other at the tip of the light. Both models include a detachable magnetic hook that can be attached to either magnet for added versatility.
Meltric hazardous-rated plugs and receptacles
Hazardous-rated metal 60-amp and 150-amp plugs and receptacles from Meltric Corporation are designed for Division 2/Zone 2 environments. The plugs and receptacles are cCSAus rated and listed to 75 hp. The amperage, voltage, horsepower and environmental ratings are indicated on the product labels. The receptacle has a dead front that isolates the supply contacts and prevents exposure to live parts. A safety shutter blocks access to the contacts and can only be opened by DSN/DS plugs with compatible ratings and contact configurations. DS60 and DSN150 receptacles have a screw-type locking pawl, letting the user lock the plug to the receptacle by tightening a screw on the pawl. A lockout hole is included for added security.
Acrison dual feeder/wetting cone assembly
The PAC feed system from Acrison features a dual feeder/wetting cone assembly with common hopper. Designed for powder-activated carbon applications where duty/standby operation is required for redundancy or for applications that need two separate independent feed points at differing feed rates, the system has two Model W105Z volumetric feeders sharing a common hopper with its own wetting cone assembly. The operator supplies both feeder systems with product from a single loading point. A Model DCBDS-400 dust collector with bag dump station is mounted on the hopper cover for dust-free loading. A manual filter shaker handle releases any accumulated dust back into the hopper.
Russelectric circuit breaker-type automatic transfer switches
Redesigned medium-voltage (5-15kV) circuit breaker-type automatic transfer switches and bypass/isolation switches from Russelectric have a 20 to 50 percent smaller footprint than previous designs. The switches are UL tested, listed and labeled under UL 1008A and suitable for use in legally required alternate power systems. Switches can be configured for open- or closed-transition transfer. Designed for unattended operation, the switches include controls for manually initiated operation. Functions are controlled by the RPTCS programmable microprocessor-based control system. Switches meet or exceed IEEE, NEMA and ANSI standards.
Kaeser Sigma Air Manager blower control
The Sigma Air Manager (SAM) 4.0 blower control from Kaeser Compressors provides seamless integration into plant control/SCADA systems, tying blowers together in a secure Sigma Network. The control analyzes operating data, simulates possible responses and selects the most efficient option to optimally match air production to system demand. Features include a 12-inch color touch screen for at-a-glance operating status, pressure history, power consumption and error messages in real time.
Tyco Oldham MX 32 gas detection controller
The Oldham MX 32 alarm and control system from Tyco Gas & Flame Detection is designed to meet SIL1 requirements. The compact, low-profile controller manages digital lines and analog channels for various gas monitoring applications. Digital technology lets up to eight detectors be distributed on two lines.